| Table of Contents |
|---|
...
- With the device IP address (Anubis / Hapi MKII / MT48)
In your browser, enter the device IP address followed by /advanced/index.html
E.g: 169.254.80.179/advanced/index.html - Through MT Discovery :
Right click on your Merging Dante ZMAN device and select Open Advanced.
GENERAL SETTINGS
REDO SCREENSHOT WITH REDUNDANT MODE TEXT
Device Name
- This is the unique zeroconf device name. Other devices see this device name.
Reboot is not required for the change to apply. Equivalent to device Setup menu > Network > Device Name (Hapi) - Location : information text (64 characters max)
...
- Sample Rate : current sample rate (44100-48000- 88200-96000-176400-192000)
- Frame size (@1Fs) :current frame size (12 - 24 - 48 - 96 - 240).
Network
- Redundant mode : Activate / deactivate Redundant mode - only applicable to Merging devices supporting such feature.
A reboot is required for the change to apply.
...
Allows to connect physical I/O and Internal device router.
DANTE
Licensing
SYSTEM
Build Number
Current firmware version
...
- Get Report : generates a debug report, and saves it on the local computer.
If the report is not saved automatically, make sure your web browser did not block the download. - Get Device Status : displays the device status (SysLog)
- Get Device Engine Status : displays the device engine - ZMAN-based devices only
UNIT IDENTIFIER
Identify me :Provides visual feedback on the unit to allow the user to quickly identify a unit (currently only available for ZMAN-based products; Anubis, Hapi MKII).
When ticking the checkbox :
...