...
- Plug your the Sub D15 Sync cable on your Horus/Hapi
- Plug your LTC input and or output on this cable
- Download and install RTP MIDI, that will allow to create Networked MIDI ports.
http://www.tobias-erichsen.de/wp-content/uploads/2015/08/rtpMIDISetup_1_1_6_238.zip - Start RTP Midi
- Create a new session, by clicking on the + icon under My Sessions section and enter a name (RAVENNA LTC in our example).
- In the Directory section, select both yourdevicename_LTC_In and LTC_Out and click on Connect to add it in the Particpants section.
- Start VCube
- Go in Ovation settings > Player Units > MIDI and select the MIDI port created in RTP MIDI (RAVENNA LTC in our example).
Enable MIDI and set the Virtual MIDI port to MIDI1.
- Go in Ovation settings > Controller Units > MIDI and select the MIDI port created in RTP MIDI (RAVENNA LTC in our example).
Enable MIDI and set the Virtual MIDI port to MIDI1.
Enable MIDI TimeCode (MTC).
...
- In VCube, go in Settings > Formats&Sync> MIDI Timecode Input and click on its Settings button.
- Select the Apple MIDI Session you have create in RTP MIDI.
- Activate the Midi TimeCode Input
- Set the Chase TC Source to Midi TimeCode (MTC)
Note |
---|
It is highly recommended to use a common video ref between Horus/Hapi and the other devices that will use the TimeCode. |
...