...
| Tip |
|---|
| PTP Priority value : 1 is the highest priority, 255 the lowest one. Merging devices are by default using Priority 127 ( when set as PTP Master and 255 when PTP )slave |
- To modify the PTP setting, you must first tick the "Manual" checkbox.
- Priority 1 is the main priority value.
- Priority 2 is only used if the other parameters do not allow to elect a PTP master.
- Class - Delay Mech. - Announce - Sync : those values should NOT be modified
- Slave only : forces the Merging device to always be PTP slave.
...