...
Proceed with a UNITE or ANEMAN to connect your DAW/AUXES Software Playback and any other I/O you will need.
More details on UNITE and connectivity can be found on this page.<Connect your performer microphone or instrument to an Anubis input (or a peered device input)
Monitor your Anubis Mixer DAW, AUX and mix with it the mic or instrument input direct from the inputs.
It is recommended that you send back to your artist a foldback mix minus their input return to avoid phasing and latency issues.Select the Cue 1, go to the Bus Routing and patch this to the Headphones or Output channels pair that your performer will monitor from.
Make a Mix balance for your performer while you are in CUE 1
Example you can add Reverb on your direct inputs or EQ or compression.
Record the performance in your DAW, while your performer will listen to the CUE Mix as an engineer you will monitor the Main Mixer.
To inject the recorded take back to your artist, use the M>C feature, to listen and prepare a Cue you can use the C>M feature.
...