Navigation buttons
...
Set the device base frequency to 44.1 or 48 kHz.
Set the base frequency Multiplier (X2 - X4 - X8 - X16 ... to reach 44.1, 88.2, 176.4, 352.8, 705.6 or 48, 96, 192, 384, 768)
Enter
Front panel
...
Clock indicator: Status (e.g. green WC)
Sampling rates: 44.1khz, 48kHz, X2, X4, X16, X32
ULN: Ultra Low Noise status.
...
MERGING+CLOCK-U (ULN) edition only.
N/10:
...
10 MHz signal
...
generation status.
RVN: RAVENNA PTP
...
clock generation status (not yet supported).
Changing CLOCK parameters
...
There will be a 5 seconds timeout before having a new setting active when changed from the Clock front panel
...
.