...
SATA Controller: Enabled
SATA Mode Selection: AHCI / Intel RST Premium (RAID)
If you plan to use RAID array, you should install Windows with this setting set to Intel RST Premium (RAID), even if your system drive will not be in the RAID Array.
You will need to add the RAID driver on your installation media, download it from the manufacturer website or use the Easy RAID installer feature (see 1.4.3 below)
WARNING: Since PMX V11/ Ovation V7 to PMX25th Hotfix2 / Ovation 9.0.5, MassCore users running a RAID configuration must use a dedicated RTX dongle (SSK-HUD-RTX) to authorize MassCore.
This issue only affects the system (Windows ) RAID drives, if you have RAID Data drives, a dedicated dongle is not required.
Since PMX25th Hotfix3 / Ovation 9.0.6, the RTX dongle SSK-HUD-RTX is no longer mandatory.
To configure your RAID array, please go in the Intel Rapid Storage Technology entry that will show up in the Advanced section after SATA mode has been set to IRSTsee the RAID Installation notes below.
SATA Aggressive Link Power Management: Disabled
Hard Disk S.M.A.R.T.: Enabled
...
If you have installed a PCIe graphic card, you should now install its driver.
See the Graphic cards recommendations and Graphic cards recommended settings.
Now you can follow our Windows configuration guides
...