Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Intel Hyper Threading Technology:Enabled (only displayed if your CPU supports this feature)
Active Processor Cores: All
CPU C States Support:Disabled
C6DRAM :
Disabled (only displayed if your CPU supports this feature)

CPU Thermal Throttling
:Disabled
Intel Virtualization Technology:Enabled
Hardware Prefetecher
:Enabled
Adjacent Cache Line Prefetch
:Enabled
Software Guard extension (SGX)Disabled (only displayed if your CPU supports this feature)

...

SATA Controller: Enabled
SATA Mode Selection: AHCI / Intel RST Premium (RAID)

If you plan to use RAID array, you should install Windows with this setting set to Intel RST Premium (RAID), even if your system drive will not be in the RAID Array.
You will need to add the RAID driver on your installation media, download it from the manufacturer website or use the Easy RAID installer feature (see 1.4.3 below)
WARNING: Since PMX V11/ Ovation V7, MassCore users running a RAID configuration must use a dedicated RTX dongle (SSK-HUD-RTX) to authorize MassCore.
This issue only affects the system (Windows ) RAID drives, if you have RAID Data drives, a dedicated dongle is not
required.

ROM Mode : Enabled (only display when SATA mode is set to RAID)
**Use RST Legacy OROM: Enabled (only displayed if SATA mode is set to Intel RST Premium)To configure your RAID array, please go in the Intel Rapid Storage Technology entry that will show up in the Advanced section after SATA mode has been set to IRST.

SATA Aggressive Link Power Management: Disabled
Hard Disk S.M.A.R.T.: Enabled

...