One of the component for the connection is not available
- ASIO : make sure you have defined enough Inputs and outputs in Merging RAVENNA ASIO panel, as you cannot make more connections than what has been defined.
Example : if only 8 outputs are set, you can only map a group of 8 outputs.
Remember also that the number of inputs and outputs is sampling rate dependent.
CoreAudio : make sure you have defined enough Inputs and outputs in Merging RAVENNA panel, as you cannot make more connections than what has been defined.
Example : if only 8 outputs are set, you can only map a group of 8 outputs.
- The RAVENNA input or output that was previously connected is no longer available on the RAVENNA network.
Example : if you connect AES1 output, and then later you remove it form from the RAVENNA network, by reassigning it into the device module menu.
|