Depending on the source selected, NADAC will automatically set its sampling rate accordingly.
| Info |
|---|
| The Sync source is always displayed on the top left corner of NADAC display. |
- WordClock input :
If a WordClock signal is detected, NADAC will always set its sampling rate according to it.
If you have external devices plugged on the NADAC, make sure those also receive this WordClock, and are configured to be synchronize on it. - AES, Optical or Coaxial input:
When such external source is selected, NADAC will always set its sampling rate according to it. - Internal :
Default sampling rate source when no WordClock or selected external device signals are detected.
...