Depending on the source selected, MERGING+NADAC will automatically set its sampling rate accordingly.
| Info |
|---|
| The Sync source is always displayed on the top left corner of MERGING+NADAC display. |
- WordClock input :
If a WordClock signal is detected, MERGING+NADAC will always set its sampling rate according to it.
If you have external devices plugged on the MERGING+NADAC, make sure those also receive this WordClock, and are configured to be synchronize on it. - AES, Optical or Coaxial input:
When such external source is selected, NADAC MERGING+NADAC will always set its sampling rate according to it. - Internal :
Default sampling rate source when no WordClock or selected external device signals are detected.
| Warning |
|---|
MERGING+NADAC can handle 1 sampling rate at a time, you cannot set the Main output and the Headphone output to 2 different sampling rates. |
...