Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

...

598pxProcedure

Operating Modes

Go to the settings by long press the Home (Pyramid) physical button and click on "SETTINGS"
Note: if the Venue icon is not selected, press it to switch Anubis into Venue mission. If the lock icon is present next to the Venue icon, you need a valid license (see prerequisites section)

2 choices of operating mode are available:

...

Access an Anubis webpage by using MTDiscovery. Right click on the device and select "Open Advanced Page"

Click on the "Session sinksI/O Router" tab (1) and create an AoIP receiver make patches (2)

Image Removed

Click on Source drop box and chose an available Source in the drop down list

Note: if the Source is not yet present in the list, you can manually name it and once the Source becomes availble and discovered in the network, the connection will become effective. Ensure that the channels count is correctly set (default is 8)
Other available settings don't need to be changed in a usual setup. Please consult the following page for more information : Merging RAVENNA Advanced Pages User Guide..

Image Removed

Scroll down to the patch matrix where the input previously created are listed
Note: While physical output (XLR 1/2. Jack 3/4, Headphone 1, Headphone 2) may be patched, it is not recommended since it will bypass the Venue mix engine.

Image Removed

By repeating the operation, you can create up to 64 receivers following your needs.

Image RemovedImage Added

Make your network patch in Dante controller

Image Added

Monitors setup

...