...
- A MacOS or Windows computer with a 1 Gb Gbps ethernet interface.
- MTDisovery tools or MAD (windows) or VAD (MacOS) tools installed on your computer.
- The latest MTDiscovery download link for Windows and MacOS https://www.merging.com/support/downloads#accessory-installers-3
- The latest MAD download link for Windows https://www.merging.com/support/downloads#mad
- The latest VAD download link for MacOS https://www.merging.com/support/downloads#macOS
- The latest (at least 1.7.0 or greater) Anubis toolkit available here https://www.merging.com/support/downloads#current-anubis-downloads
The toolkit includes the Anubis Dante firmware and the remote control app for Windows and MacOS - Dante controller
- A valid license key for the Venue mission.
You can ask for a temporary license here: https://www.merging.com/trial/venue-mission - A Dante ready license.
...
Change the name, color, type, trim, delay...
Patch an input
Note : patches can be later see...
Skip this step if you want to patch a AoIP stream
Scroll down to the Channels section. and click in the green area
...
Choose a input in the list by clicking Single
Note : click None if you want to unpatch an existing input
Patch an incoming Dante stream
Access an Anubis webpage by using MTDiscovery. Right click on the device and select "Open Advanced Page"
Click on the "I/O Router" tab (1) and make patches (2)
Note : you can rename In/Out in the Ins/Outs page next to the I/O Router
Make your network patches in Dante controller
Monitors setup
In the Settings>Monitors click on a Monitor to set it up.
...
Scroll down and set which inputs are available for the Monitor by clicking on "Show"
Patch monitor input to a physical I/O or a stream
Access an Anubis webpage by using MTDiscovery. Right click on the device and select "Open Advanced Page"
Note : MAD or VAD may be used instead
Click on the "I/O Router" tab (1) and make patches (2)
Note : you can rename In/Out in the Ins/Outs page next to the I/O Router
Configuration deployment
Clone
In MTDiscovery, right clîck on the configured Anubis and click on "Open Web App"
...
- The device name have to be unique in a network.
- The device name can be changed from Dante controller
Dante network routing
Make your network patches in Dante controller