...

• A MacOS or Windows computer with a 1 Gbps ethernet interface.
• MTDisovery tools 15.0.10 and above installed on your computer.
  • The latest MTDiscovery download link for Windows and MacOS https://www.merging.com/support/downloads#accessory-installers-3
• An Anubis with a Dante firmware installed
  • The latest (at least 1.7.0 or greater) Anubis toolkit available here https://www.merging.com/support/downloads#current-anubis-downloads
    The toolkit includes the Anubis Dante firmware and the remote control app for Windows and MacOS
• Dante controller installed on your computer
  • The latest Dante controller installer download page https://my.audinate.com/support/downloads/download-latest-dante-software
• A valid license key for the Venue mission.
  You can ask for a temporary license here: https://www.merging.com/trial/venue-mission
• A Dante ready license.
  • See Dante Ready Quick Start guide. - Merging Public Document - Confluence (atlassian.net) for details

Procedure

Preamble

While some configuration may be done on the Anubis device, the following operation can be achieve from a computer. To access to a specific Anubis one of the following wayyou need to launch a Remote Controller from MTDiscovery. 

Operating Modes

Go to the settings by long press the Home (Pyramid) physical button and click on "SETTINGS"
Note: if the Venue icon is not selected, press it to switch Anubis into Venue mission. If the lock icon is present next to the Venue icon, you need a valid license (see prerequisites section)

...

Click on the "I/O Router" tab (1) and make patches (2)Note : you can rename In/Out in the Ins/Outs page next to the I/O Router 

A typical patch should look likes:

• • Physical inputs (Combo 1/2 Jack 3/4) routed to Dante and to the personal mix inputs
  • Builtin-Mic to Dante for talkback purpose
  • Dante streams such as stems and talkback to the Personal mix inputs
  • Personal mix monitors to Physical outputs (XLR 1/2, Jack 3/4 Headphone1, Headphone 2) and to Dante streams for mix loopbacks

Note :

Detailed information on this web app may be found here 

Configuration deployment

Clone 
In MTDiscovery, right clîck on the configured Anubis and click on "Open Web App"

The following web page should be displayed. From the Menu (1), Download the preset file (2). Save it to your computer

...