...

• A MacOS or Windows computer with a 1 Gbps ethernet interface.
• MTDisovery tools 15.0.10 and above installed on your computer.
  • The latest MTDiscovery download link for Windows and MacOS https://www.merging.com/support/downloads#accessory-installers-3
• An Anubis with a Dante firmware installed
  • The latest (at least 1.7.0 or greater) Anubis toolkit available here https://www.merging.com/support/downloads#current-anubis-downloads
    The toolkit includes the Anubis Dante firmware and the remote control app for Windows and MacOS
• Dante controller installed on your computer
  • The latest Dante controller installer download page https://my.audinate.com/support/downloads/download-latest-dante-software
• A valid license key for the Venue mission.
  You can ask for a temporary license here: https://www.merging.com/trial/venue-mission
• A Dante ready license.
  • See Dante Ready Quick Start guide. - Merging Public Document - Confluence (atlassian.net) for details

Procedure

Preamble

While some configuration may be done on the Anubis device, the following operation can be achieve from a computer. To access to a specific Anubis one of the following wayyou need to launch a Remote Controller from MTDiscovery. 

Operating Modes

Go to the settings by long press the Home (Pyramid) physical button and click on "SETTINGS"
Note: if the Venue icon is not selected, press it to switch Anubis into Venue mission. If the lock icon is present next to the Venue icon, you need a valid license (see prerequisites section)

...

• • Physical inputs (Combo 1/2 Jack 3/4) routed to Dante and to the personal mix inputs
  • Builtin-Mic to Dante for talkback purpose
  • Dante streams such as stems and talkback to the Personal mix inputs
  • Personal mix monitors to Physical outputs (XLR 1/2, Jack 3/4 Headphone1, Headphone 2) and to Dante streams for mix loopbacks

Note :you can rename In/Out in the Ins/Outs page next to the I/O Router 

Detailed information on this web app may be found here 

Configuration deployment

Clone 
In MTDiscovery, right clîck on the configured Anubis and click on "Open Web App"

...