Page Comparison

• Compatibility: Windows 7 - 64bit

• The RAVENNA ASIO driver is available for Horus users that wish to use their notebook GbE Network RJ-45 system socket.

...

• AES67 (Horus/Hapi at 48

...

• sample latency)

...

Installation Guide

1. Install the Merging Ravenna ASIO Driver provided with your Horus or available from the Merging Website.

2. We recommend that you reboot your system after the installation.

3. Once your system has booted, launch the RAVENNA ASIO panel from the Windows start menu and select the Local Adapter where the Horus is connected to, recommended buffer size are available in the Ravenna Asio Guide 

4. With usage along with Pyramix. Launch the VS3 Control Panel (Start Menu > Control Panel > VS3 Control Panel) and select the RAVENNA ASIO and the correct card/device in the VS3 Control Panel (Start Menu > Control Panel > VS3 Control Panel)

...

• is supported since V11. Previous ASIO driver versions can only be used with the standard 64 samples latency (and therefore not compatible with AES67).
• The Merging MassCore NIC (NET-MSCGBEX1) will not function for RAVENNA ASIO use, it is dedicated to MassCore.

...

• RAVENNA ASIO user should have administrator rights to configure the ASIO Panel.

...

• About the number of channels, we recommend you to set it to the number of channels you will actually use.
  If you set to 64 channels, but only use 8, the remaining 56 channels will still consume some power processing.
• For better performance, a dedicated network card for RAVENNA ASIO communication is recommended. 
  See this page for detailed settings.