...
Validated BIOS version : 1.50 50 / 2.0 / 3.10 / 4.20 - Please consult support@merging.com for other BIOS support.
First update BIOS if required.
...
Sealevel GPIO 8206 & 8206FX are NOT compatible with this motherboard, because of their incompatibility with Intel USB chipsets.
Other SeaLevel GPIO are compatible, see our supported controllers table for details on supported models.
BIOS first opens in the EZ mode page, a summary of the system information.
You may adjust date and time.
Please switch to Advance Mode (F6)
...
SATA Controller: Enabled
SATA Controller Speed: Auto
SATA Mode Selection: AHCI / Intel RST Premium (RAID)
WARNING: Since PMX V11/ Ovation V7, MassCore users running a RAID configuration must use a dedicated RTX dongle (SSK-HUD-RTX) to authorize MassCore.
This issue only affects the system (Windows ) RAID drives, if you have RAID Data drives, a dedicated dongle is not required.
Launch Storage OpROM Policy : Legacy only (displayed only when SATA mode is set to RAID) (For Intel Optane Memory, this setting must be set to UEFI only)
SATA Aggressive Link Power Management : Disabled
Hard Disk S.M.A.R.T. : Enabled
...
Suspend to RAM: Disabled
ACPI HPET Table : Enabled Enabled (BIOS 1.50 only, this option has been removed in BIOS V2.0)
PS/2 Keyboard Power On: Disabled
PCIE/PCI DevicesPower On: Disabled
Ring-In Power On: Disabled
USB Keyboard / Remote Power On: Disabled
USB Mouse Power On: Disabled
...
You can save your BIOS settings in the OC Tweaker page, into the motherboard ROM or on a USB drive (must be formatted as FAT32)
After a BIOS update, those settings might be lost or incompatible with the updated BIOS version.
2.WINDOWS INSTALLATION
Windows 10 users may install from Windows 10 CD or USB bootable drive.
...
After the installation plug Security dongles, NET-MSC-GBEX1 and other Merging hardware.
(not the Ovation-Pyramix Keyboard!)
See dedicated install guide / user manual for further details.
The NET-MSC-GBEX1 card can be fitted in PCIe1x.
RTX64 dongle (SSK-HUD-RTX) users :
-Version prior to RTX64 V3 : the user must install the specific HASP HL drive before installing MassCore.
http://download.merging.com/beta/AssociatedTools/Sentinel_LDK_Run-time_setup7.63.zip
-RTX64 V3.x : driver included in MassCore Runtime installation, please plug the dongle when installing MassCore.
Select the “Windows GUI” installer
Black Magic Decklink Studio/Decklink Studio 4K should be placed in PCIe slot 4.
Black Magic Mini-Monitor can be placed in any PCIe slot.
Black Magic driver has to be installed separately; it is not included in Merging installers.
...
See the MT Security Troubleshooting in case of issues.
4.2 THIRD
...
PARTY SOFTWARE
Install Google Chrome
https://www.google.com/chrome
If there are several users on the computer, you need to use the alternate Chrome installer for all users : http://www.google.com/chrome/eula.html?system=true&standalone=1
Set merging.com as start page !
...
If you have controllers, you can install the required software (Eucon, NetSmart, GPIO,....)
Networked controllers cannot use the same IP addresses range as the RAVENNA Network.
See this page for further details.