Page Comparison

Image RemovedImage Added

...

1. With the device IP address (Anubis / Hapi MKII / MT48)
   In your browser, enter the device IP address followed by /advanced/index.html
   E.g: 169.254.80.179/advanced/index.html
   The device IP address can be found on the device Network Settings and in Dante Controller Device View > Status Tab.
2. Through MT Discovery : (v 20.0.0. or above required) 
   Right click on your Merging Dante ZMAN device and select Open Advanced.
   Image RemovedImage Added

Dante Controller

Sample rate and network configuration can also be accessed with Dante Controller.
Some settings (device latency, audio codec,....) can only be accessed with Dante Controller.

GENERAL SETTINGS

Image Removed Image Added

Device Name

• This is the unique zeroconf device name.  Other devices see this device name.
  Device Name is case insensitive, 31 characters max, Unicode and non-roman characters are not supported.
  See Dante Documentation for details.
  Reboot is not required for the change to apply.  Equivalent to device Setup menu > Network > Device Name (Hapi)
• Location : information text (64 characters max)
  
  

...

Allows to change the name of module's specific Inputs and / or Outputs. (when applicable)
Image Removed
Image Added

I/O ROUTER

Allows to connect physical I/O and Internal device router.

DANTE

...

Image Added

• Max 16 Channels per module : Shows the 16 first channels of modules (only applies to modules having more than 16 channels)

SYSTEM

Image RemovedImage Added

Build Number

Current firmware version

...

• Get Report : generates a debug report, and saves it on the local computer. 
  If the report is not saved automatically, make sure your web browser did not block the download.
• Get Device Status : displays the device status (SysLog)
• Get Device Engine Status : displays the device engine - ZMAN-based devices only (which includes the Json Tree of the device)

UNIT IDENTIFIER

Identify me :Provides visual feedback on the unit to allow the user to quickly identify a unit (currently only available for ZMAN-based products; Anubis, Hapi MKII).
When ticking the checkbox :

...

• Dante mode is only available for Merging Technologies Anubis and Hapi MKII, and Neumann MT 48.
  Previous Merging devices, Horus and Hapi, are not compatible.
• Dante mode requires a Dante license .(Dante Ready)

External Links

https://www.audinate.com/learning/technical-documentation
https://en.wikipedia.org/wiki/Precision_Time_Protocol

...