Installation

...

• 14.1.0 Beta 1: Updated Channel naming.
  Channel types/Speakers naming convention has been updated to the Dolby standard, being:
  Left : L
  Center : C
  Right : R
  Surround Left : Lrs
  Surround Right : Rrs
  LFE : LFE
  Center Left : Lc
  Center Right : Rc
  Surround Center : Cs
  Side Left : Lss
  Side Right : Rss
  Wide Left : Lw
  Wide Right : Rw
  Voice of God : VoG
  Top left : Ltf
  Top Center : Ctf
  Top Right : Rtf
  Top Surround Left : Ltr
  Top Surround Center : Ctr
  Top Surround Right : Rtr
  Top Side Left : Ltm
  Top Side Right : Rtm
  Bottom left : Lbf
  Bottom Center : Cbf
  Bottom Right : Rbf
  Bottom Surround Left : Lbr
  Bottom Surround Center : Cbr
  Bottom Surround Right : Rbr
  Bottom Side Left : Lbm
  Bottom Side Right : Rbm
  Voice of Devil : VoD
  LFE2 : LFE2
  Note : Projects created from previous versions are automatically updated to the new naming convention.

• 14.1.0 Beta 1 : 5.1.2 / 7.0.2 / 7.1.2 / 9.1.2 busses/strips plug-ins
  

  Some VST3 plug-ins inserted on x.x.2 busses (5.1.2, 7.0.2, 7.1.2, 9.1.2) where instantiated as Stereo only.
  This was due to the definition of .2 in Pyramix being Top Front Left and Top Front Right channels where these plug-ins were expecting Top Side Left and Top Side Right.

  Four new speaker layouts have been added to solve the issue: 5.1.2 Side, 7.0.2 Side, 7.1.2 Side and 9.1.2 Side. These layouts should now be used for inserting such plug-ins.

  Former 5.1.2, 7.0.2, 7.1.2, 9.1.2 layouts have been preserved for compatibility and renamed 5.1.2 Front, 7.0.2 Front, 7.1.2 Front, 9.1.2 Front.

  Both are properly supported by the Atmos ADM Export feature and export either Top Front or Top Side depending on the selected type.

  When importing an Atmos ADM, 7.1.2 and 7.0.2 do create a Top Side configuration now.

• 14.1.0 Beta 1: Dolby Atmos Master Export - Options - Force Main Bed to 7.1.2
  Force Main Bed to 7.1.2 (14.1 Beta 1) - Generates the main bed as 7.1.2 whatever the bus configuration, as requested by Universal Music.
  Note that this does not modify the audio, the additional Bed channels will be empty, and the Top and/or Wide channels will remain as Objects, as in previous Pyramix version.
• 14.1.0 Beta 1: Mixer Dolby Atmos Advanced dialog
  Audio Routing Options:
  • Connect starting with First Audio Output with optional Offset - to route all busses and objects to regular audio outputs. An offset is now offered to allow to keep the first audio outputs channels for other purpose, like monitoring, then use the followings for connecting to the Dolby Atmos Renderer.
  • Connect to MT ASIO Bridge - to route all busses and objects to the MT ASIO Bridge outputs. This is useful for MassCore users willing the run the Dolby Atmos Renderer in the same computer as Pyramix. Dolby Atmos Renderer version 5.0.0 and above is required.
    Native users willing the run the Atmos Renderer in the same computer should preferably use the MAD Bridge.
    
• 14.1.0 Beta 1: Bus/Group Solo Safe improvements:
  Mix Bus:
  Solo Safe protects any input strip sending to that Bus from being muted when soloing any other input strip. (Unchanged)
  Mix Group:
  Solo Safe protects any input strip sending to that Group from being muted when soloing any other input strip. It also protects the Mix Group Return Strip from being muted when soloing any other strip.
  When Solo Safe is not enabled, the Mix Group Return Strip is automatically protected anyway when soloing any input strip sending to that Group, but not when soloing any input strip not sending to that Group.
  (Changed as described above since 14.0.6)
  Aux Bus:
  Solo Safe protects any input strip sending to that Bus from being muted when soloing any other input strip. (Unchanged)
  Aux Group:
  Solo Safe protects the Aux Group Return Strip from being muted when soloing any other strip. (Unchanged)
• 14.1.0 Beta 1 : Archiving Metadata
  A set of predefined values can be set in the registry in: HKEY_CURRENT_USER\Software\Merging Technologies\Pyramix\ArchivingMetaData\ PredefinedValues as String entries where the names of the strings are the predefined values for the Value field.
  XTOC metadata can be generated along with the ArchivingMetadata using the following registry key HKEY_CURRENT_USER\Software\Merging Technologies\Pyramix\ArchivingMetaData.  Add a DWORD “Include XTOC” = 1
• 14.1.0 Beta 1 : AAF Import Performance
  
  AAF Import performances improved in case of large existing media manager or libraries
  Global media cache (Media_Library_.pml) is automatically updated when loading Pyramix.
  Existing quick mount libraries (QuickMount7_.pml) in every media folders can be re-created by refreshing the media folders manually. This has however lower impact on the performances than the global media cache mentioned above.

Bug fixes

Fixed Bugs in Pyramix 14.1

...

.2

• New keys required for Pyramix 14.1 / Ovation 10.1  (as of the RC1)
• PMX140-216: Fixed. Recording wave in "Suffix with strip name" and "One file per track" places media incorrectly.

...

• PMX140-36: Fixed. Stereo Dual Pan 
• PMX140-39: TC Generator plugin: mute on stop by default
• Atmos ADM Import - Fixed. import of FFOA at 00:00:00:00
  
• Atmos ADM Import - Fixed. import of NOT_INDICATED render wrap mode
• Several Dolby Atmos maintenance
• Mixer Strip panner may display wrong front/rear values (display issue only)
• PMX140-38: Fixed. Mixdown between marks.

...