Page Comparison

How to access the Advanced pages

1. With the device IP address :
   1. Horus/Hapi/NADAC/Anubis
      In your browser, enter the device IP address followed by /advanced/index.html
      E.g: 169.254.80.179/advanced/index.html
   2. VAD (ASIO, CoreAudio, ALSA)
      In your browser, enter the device IP address followed by :9090
      E.g: 169.254.80.179:9090
2. Through MT Discovery :
   Right click on your device and select Open Advanced (Hardware devices : Horus, Hapi,...) or Open (Software devices : MassCore, ASIO, Alsa,....)
3. Through ANEMAN : 
   Right click on your device and select Web Services : Advanced (or RAVENNA if Advanced is not available)

GENERAL SETTINGS

Image RemovedImage Added

Device Name

• This is the unique zeroconf device name.  Other devices see this device name.
  Reboot is not required for the change to apply.  Equivalent to device Setup menu > Network > Device Name (Horus/Hapi)
  Merging recommends to not exceed 32 characters (The device name is translated to UTF8, which support max 63 bytes)
• Location : information text (64 characters max)

Audio Configuration 

• Sample Rate : current sample rate (44100-48000- 88200-96000-176400-192000-352800-384000)
• Frame size (@1Fs) :current frame size (64 - AES67/48 - 32 -16 - 12 -6).
  Note that available frame size values may not be available or differ according to the device and/or firmware.

Session Sinks Global

• Safety Playout Delay (@1Fs) : additional playout delay.  The value is described at 1Fs (44.1-48 kHz) in samples.
  For example, if the value is 10, the additional playout delay will be 20 at 2Fs (88.2-96 kHz), 40 at 4FS (176.4-192 kHz),...

• SSM (requires IGMP v3) : Source-Specific Multicast.
  If you activate this option, make sure your network switch supports and is configured for IGMP V3.

Network

• Multi-Interface mode : Activate / deactivate ST2022-7 mode - only applicable to Merging devices supporting such feature.

Interface 1-2

Note : depending on the device and firmware, only Interface 1 might be available.

• Link : status
• Name : information only - can't be modified
• Type : defines the type of IP V4 address used (Zeroconf - DHCP - Static)
• Address - NetMask - Gateway - DNS : only available if Type is set to Static.
  Reboot is required for changes to apply.

PTP

Global 

• PTP Domain : allow to define a specific PTP domain, usually when several PTP masters are required in the same network (default value for Merging devices and programs is 0).

  Expand
  title PTP Domain support is available since the following versions
  MassCore : Pyramix v11.1.5 / Ovation v7.1.5 Ravenna ASIO : v12.0 ALSA : v1.0 CoreAudio / Virtual Audio Device : v2.0.37746 Horus - Hapi - NADAC : firmware v3.9.2 Anubis : firmware v1.0

  
  

• DSCP : PTP DSCP (46-EF : PTP AES67 / 48-CS6 : PTP RAVENNA / 56-CS7)

Master

To modify the PTP setting, you must first tick the "Manual" checkbox.

• Priority 1 is the main priority value.
• Class : Device class.  This value should not be modified.
• Accuracy : cant be modified.
• Priority 2 is only used if the other parameters do not allow to elect a PTP master.
• GMID : Current GrandMasterID (PTP Master)

• Slave only  : forces the Merging device to always be PTP slave.

• Delay Mech.:  PTP Profile related - E2E or P2P (Note: MassCore does not use PTP Delay Mechanism)

• Announce : PTP Profile related - PTP announcement interval (0.125 - 0.25 - 0.5 - 1 - 2 - 4 - 8 -16 seconds)

• Sync : PTP Profile related (0.0625 - 0.125 - 0.25 - 0.5 seconds)

Status 

• ASIOClock Host : Master ASIO Clock device IP address (only displayed for Merging RAVENNA ASIO device).
• GMID : Current GrandMasterID (PTP Master) 
• Lock : shows if the device is locked to PTP (Locked -Locking - Unlocked)
• Interface 1-2 :
  Note : depending on the device and firmware, only Interface 1 might be available.
  PTP status : 
  Master : Device is Master
  Slave : Device is Slave
  Listening : The interface is not used for synchronization.
  
  

• Statistics (since firmware 3.9.3)
  The graph is only active for slave devices. Not available for ASIO device.
  Green curve : shows the regulated device delta against the current Master PTP clock.
  Grey curve : shows the network delta against the current Master PTP clock, before the device regulation algorithm.