Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 2 Next »

Prerequisites

  • Pyramix v xxxxx installed and authorized

  • MassCore (RTX64 4.xxxxxxxx) installed and authorized

  • 2x MassCore NIC cards of the same generation ; either 2x NET-MSC-GBEX1 or 2x
    Using different MassCore NIC card models is not allowed.

  • Compatible Merging device(s) configured in ST2022-7 mode.


Card conversion

Procedure

  • Config device 2022-7

  • Start the VS3 Control Panel in Administrator mode.
    The Primary Network adapter should be already filled in.

  • Add a Secondary Network adapter NIC and press Apply.

  • To easily differentiate the MassCore NIC cards, you may plug / unplug their network cables.
    The connection status will be reflected in the VS3 Control Panel.

  • Press OK to close the VS3 Control Panel

  • IP in the secondary NIC

  • No labels