Windows has been designed for a wide variety of applications. Unfortunately that means that, out-of-the-box, it works correctly for office or entertainment applications, but for DAW applications, several settings and features have to be fine-tuned.
1.BIOS
If you can access your computer BIOS, it is recommended to disable all power management features of your CPU, as this implies changes in the CPU speed and that is far from optimal for any audio application.Same applies to overclocking.Please have a look at your motherboard manual to locate those settings, may vary depending of the manufacturer.
Intel Turbo Boost Technology: Disabled
CPU Enhanced Halt (C1E): Disabled
C-State Support (C3, C6, C7, C8 State): all Disabled
CPU EIST Function: Disabled (also called Intel Enhanced SpeedStep, that should always be disabled)
CPU power saving mode: Disabled
2.WINDOWS CONFIGURATION
During Windows installation, on “Get Going fast”, do not use Express settings, select Customize.
On the first page, set all options to have off.
On the second page, set all options to have off.
On the third, you can leave Smart Screen option on, set the other options to off.
If you don’t have a Microsoft account, you can click on “skip this step” at the bottom of the page when Windows prompt you for your Microsoft account.
Merging recommends you don’t activate Cortana now, but configure it later once the OS is installed.
A note on drag & drop and Run as Administrator in Windows 10.
In Windows 10, when you run a program by forcing it in “administrator mode” / “Run as administrator”, drag & drop to and from this application will be disabled.
DEVICE DRIVERS
Merging recommends to install WHQL (Driver certified by Microsoft) or if not available, the latest drivers from the manufacturer website.
Install the drivers ONLY, do not install the utilities it can cause much trouble.
Do not install Intel® Control Center that is included in Intel® Rapid Storage Technology installer or Intel® Management Engine installer.
Do not install the RealTek Ethernet Diagnostic utility.
WINDOWS CONTROL PANEL
To access Windows 10 Control Panel, right click on Windows Start and select Control Panel.
For ease of use, it is recommended to set the Control Panel to Small Icons.
Disable Windows User Account Control (UAC)
User Accounts > Change User Account Control settings > set it to Never notify. > OK.
View hidden files, folders and drives and show file extensions in Windows Explorer
File Explorer Options > View tab :
Hidden files and folders : set it to Show hidden files, folders or drives
Hide empty drives : disable
Hide extensions for known file types : disable
Leave Hide protected operating system files (recommended) active
Power Options
MassCore users have to first disable the "Fast Boot feature", which indeed put the computer to sleep when you select shut down.
Click on "Choose what the power buttons do” on the left hand side of Power options page.
Then click on "Change Settings that are currently unavailable" and uncheck the "Turn on fast startup" option. Click on Save Changes. Note also that hibernate / sleep is not supported by MassCore engine.
In the main Power options page :
Set the power scheme to High Performance (Native users) or RTX – recommended (MassCore users) .
Then Change plan settings
Screen Saver (Turn off the display) is usually set to Never. If you are recording, you surely don’t want the display to turn off after several minutes!
Put the computer to sleep must be set to Never
Access Change advanced power settings and make sure that:
Hard Disk > Turn off Hard disk after: Never
Desktop background settings > Slide show: Paused
Sleep > Sleep after: Never / Allow hybrid sleep: off / Hibernate after: Never / Allow wake timers: Disable.
USB Settings > USB selective suspend setting: Disabled
Intel(R) Graphics Settings : Maximum Performance
PCI Express > Link State Power Management: Off
Processor power management > System Cooling policy : Active
Minimum and Maximum processor state: 100%
Sound
Windows can notify the user of some vents by playing a sound.
If your ASIO device is also used by Windows to play its sounds, it may cause audio drops as it will access the device.
In that case it is recommended to access the Sounds tab and set the Sound Scheme to No Sounds.
System > Advanced System Settings
Advanced tab > Performance
Click on the Settings button in the Performance section.
Visual Effects tab
Those settings have to be disabled to prevent system peaks:
Animate Windows when minimizing and maximizing : disable
Animations in the taskbar and Start Menu : disable
Enable Peek : disable
Fade or slide menus / ToolTips into view : disable
Save taskbar thumbnail previews : disable
Show translucent selection rectangle: disable
Show window content while dragging: disable
Slide open Combo boxes: disable
A dedicated graphic card is highly recommended for advanced display configuration, including video or Mixer window in Pyramix, Ovation or VCube.
Advanced tab
Processor Scheduling should be set to Background Services for Native ASIO users.
Data Execution Prevention tab
Turn on DEP for essential Windows programs and services only.
System Protection tab
Back in the main System windows, switch to System Protection tab:
Make sure protection is turned on for your system drive.
Select the system drive and click on Configure.
Select Turn on system protection, and set a value for Disk Space Usage (usually 10% max).
Disable the system protection on the Media drive(s), as this feature only works on system files and programs.
Hardware tab
Back in the main System windows, switch to Hardware tab:
Click on Device Installation Settings and select the “No, let me choose what to do" option.
This will prevent Windows update service to automatically change the system drivers.
Windows Firewall
By default, Merging applications are authorized to communicate through the Windows Firewall.
In case of issue, RAVENNA Users can disable the Windows Firewall (for Public Networks).
If you use another firewall, authorize the required applications or disable it on your RAVENNA network.
Windows Defender and antivirus
Tools page > Options: adjust Automatically scan my computer to your needs.
Full Virus Scanning should NEVER run at the same time as Merging software.
If you plan to install an Antivirus software, Windows Defender will be disabled.
You should also disable scanning of the Pyramix files (pmx, pmf, pml, pad, pmw) but also media files (wav, aif, flac, mp3,...), because each time the DAW have to access such file, your antivirus may scan it.
AVAST has already caused a lot of problems with several Merging programs, it is therefore not recommended.
See this page for help on configuring your antivirus exceptions.
Windows Defender users can download and run a script to include the required rules in Windows Defender.
Win10DefenderExclusionsMT.zip
WINDOWS SETTINGS
Settings page can be accessed through Windows Start > Settings icon (and 
+ i)
System
In Apps and features, uninstall all unnecessary applications.
Some applications cannot be uninstalled (Mail and Calendar for example), uninstall button will be disabled.
Bonjour is required for Merging products, do not uninstall it.
In Default apps, Merging recommends you set Google Chrome as your default web browser (RAVENNA users).
Click on Web Browser to select Google Chrome (it must be installed before changing this setting).
In Notifications & actions, you can configure which quick action tile and notification will be displayed.
Merging recommends to only have “All settings” & “Network” tiles active.
In the Notifications section, you can configure how and which application can send Notifications.
Merging recommends to disable the “Get tips, tricks, and suggestions as you use Windows” for better performance.
MultiTasking
– Virtual desktops Check MassCore / graphic card
Not recommended during real time operation, only massCore and dedicated graphic card
Personalization
Windows transparency can cause issues, especially on systems with low graphic resources.
Go in Settings > Personalization > Colors.
Turn "Make Start, taskbar, and action center transparent" to Off.
Start menu, Taskbar and notification area can be configured in Settings > Personalization > Start and Taskbar.
Merging recommends to disable the “Occasionally show suggestions in start” option for the Start menu.
In the Taskbar section, disable the "Use Peek to preview the desktop ...."
Privacy
In Account info, it is recommended to set "Let apps use my advertising ID ...." to off, to reduce the OS internet traffic.
In Background Apps, Merging recommends you only enable the required apps for better performance.
ADDITIONAL CONFIGURATIONS
Cortana configuration
Merging recommends you disable Cortana, for better performance.
Download this zip file http://download.merging.com/beta/SupportTools/W10Cortana.zip
Double click on the Disable Cortana.reg file.
Restart your computer for this change to take effect.
You can re-enable Cortana with the Enable Cortana.reg file.
Apps auto-update
Merging recommends you disable the auto updates on Windows Apps, for better performance.
Open Windows Store, and click on the profile icon on the top right corner and select settings.
Set “Update apps automatically” to off.
OneDrive configuration / uninstall
If you use OneDrive, you should configure it to not interfere in the network traffic.
Right click on the OneDrive icon 
in the notification area and select Settings.
Remove "Start OneDrive Automatically when I sign to Windows" and "Display notifications when people share with me or edit my shared files".
In the Network tab, set both Upload and Download rates to Limit to : 125 KB/s (or lower).
If you don't use OneDrive, you may uninstall it in Windows Settings > System > Apps and features.
WinSAT
In Windows 10, Windows System Assessment Tool (WinSAT) is scheduled to run too often compared to previous Windows version. Therefore Merging recommends you configure it as it was in Windows 7.
Start the Task Scheduler in Windows Control Panel > Administrative Tools.
Browse the Task scheduler Library to Microsoft > Windows > Maintenance and double click on the WinSAT task.
In the Triggers tab, click on New, and set "Begin the task" to “on a schedule”, then Weekly / Sunday / starting at 1AM. Remove any other remaining trigger.
Go in Conditions tab, and make sure the "Stop if the computer ceases to be idle" is activated.
Laptop – Battery saver
Windows 10 introduces a new battery saver feature that conserves your PC's battery by limiting background activity and adjusting hardware settings. This feature can cause serious performance issues.
Merging recommends you disable the Battery Saver during recordings and critical real time operations.
Go in Windows Settings, and select System > Battery.
Set Battery saver is currently to Off.
This setting will be grayed out if the PC is currently plugged in to AC.
You may still set the Battery saver on if your battery falls below a specified %.
Activate the “Turn battery saver on automatically if my battery falls below” and set a value (Merging recommends 10 %).
WINDOWS DEVICE MANAGER
Ports (COM & LPT)
If you use 9pin-RS422 connection:
Communication Port (COM x) > Properties
Ports Settings tab > Advanced > set both Receive and Transmit buffer to Low (4)
Universal Serial Bus controllers
Check each USB Root Hub and disable power management if any, by right clicking on it and accessing its properties.(Power Management tab)
Network Adapters
Right click on your network adapter and access its properties to disable the power management features:
Disable Energy Efficient Ethernet and Green Ethernet, and all Power Saver / Power management features.
RAVENNA ASIO users have to set WOL & Shutdown Link Speed to Not Speed Down.
For better performance, RAVENNA ASIO users should use a dedicated RAVENNA network adapter.
Find more details on this page.
MEDIA DRIVES
By default; Windows will index the content of all drives, which allows Windows Search to work faster.
But this indexing task takes CPU power and can result in performance issue when recording.
To disable the Windows indexing, open My Computer, right click on the Media Drive(s) and select Properties: disable Allow files on this drive to have contents indexed in addition to file properties checkbox.
NEVER USE “Compress this drive to save disk space”.
External drives: access your external drive properties through Windows Device Manager and set it to optimize for performance.
Format block size: if you only use audio files, the best size is 64 Kb when formatting the drive.
But if you also need to use video files, 64Kb is not the optimal size, in that case keep the Default Allocation size (128Kb).
The best way is to use separate drives for video and audio, if possible.
SYSTEM CONFIGURATION (MSCONFIG)
Many installed programs have associated background services, which usually can then start faster, or get updates automatically. But this uses memory and CPU power, so you should only run useful programs.
!!!Be careful, if you remove an essential program or service, Windows may not start anymore !!!
Windows Control Panel > Administrative Tools > System Configuration:
The boot menu timeout can be changed in the Boot tab (min 3 seconds).
Services Tab
Check the box Hide all Microsoft services, those are critical for Windows.
Service Bonjour is critical for RAVENNA networks and Virtual Transport.
Do not disable your graphic card and ASIO card driver or service.
Common services that can be disabled are: printer services, Skype, QuickTime updaters ...
Ajouter services Win10 – laptop critical
Startup
Open the link to Task Manager to access the list.
Do not disable Microsoft Windows Operating System or any other critical driver – program for your system.
Common programs that can be disabled are Adobe Reader, Java updater, Skype, QuickTime...
Those programs will be still be installed and accessible, but will not be loaded during Windows startup.
WINDOWS UPDATE
One of the main issue with Windows 10 is that Microsoft wants the OS to always be up to date.
That means, by default, you do not have control anymore if you want to apply updates or not.
As in previous versions, sometimes an update can go wrong, and Windows can become unusable.
Hopefully it is still possible to get control under the hood, through Windows registry.
Please note that it will only works on Pro or Enterprise versions, not on Home editions.
Automatic Updates configuration
If you want to follow the Microsoft update policy, you can configure it to restart outside of active hours :
Go in Windows Start > Settings > Update and security > Windows update.
In Update settings, click on Change active hours and set it according to your needs.
This prevents Windows to restart the computer, but it still downloads the updates.
Go now in Advanced Options, and check the "Defer feature updates" : this will defer updates, allowing only widely tested updates to be applied on your computer.
Click on the "Learn more" button for further details.
Manual configuration
Download and unzip our Windows 10 update configuration file.
Double click on the configuration you want to use :
Notify to download and install (recommended), Auto download and notify to install, Auto download and schedule installation.
The registry editor have to confirm that the keys have been successfully included.
You have to log off or restart the computer for the change to apply.
If you go in Windows Settings > Update & Security > Windows update and click on “Check for updates”, it will bypass the setting.
When updates will be available, Windows will notify you in this page, and in the Action Center.
If you had pending updates, you may have to install it before the change apply.
Additional configuration
In both case, Merging recommends you disable updates from other computers (your computer can receive, but also send updates directly to other computers, costing computer resources and network bandwidth) .
Go in Windows Settings > Update & Security > Windows Update > Advanced options > Choose how updates are delivered.
“Updates from more than one place” should be set to off. The second option will be automatically disabled.
Disable Windows update
You can also completely turn off the Windows Updates engine, but that is not recommended, some programs may fail to install properly.
Open Windows Control Panel >Administrative Tools > Services.
Locate and select Windows Update.
Double click to access its properties.
Stop it, then set Startup type to Disabled.
DPC LATENCY CHECK
To handle real time application, the CPU gets a defined amount of time to perform the required tasks.
If those tasks are delayed, the result is usually drop-outs in the signal.
A common tool to verify if your computer is able to handle real-time audio was DPC Latency Checker, but the reported values are false in Windows 8 and 10.
Hopefully Windows 10 includes the tool to verify the DPC latencies:
Right click on Windows Start button, and select Control Panel, then Administrative Tools.
Open Performance Monitor, and select Performance Monitor in the left hand pane.
Click on the + button on top of the graph to add the following counters :
In Processor (group), select % DPC Time and % Interrupt Time.
For ease of use, it is recommended to disable all other values (by default, Processor Time) at the bottom of the graph.
Now change the scale of %DPC time by double clicking on it in the bottom section of the page.
Set the Scale value to 10.
Repeat the same operation on % Interrupt Time.
Those 2 parameters should not exceed 10 in the graph scale.
If you have higher values, you will have to search for the driver/ device that is causing the issue by disabling them one by one.
Remember that some devices cannot be disabled, proceed with caution.
Wi-Fi, LAN, specific USB devices, on-board audio, PCI / PCIe devices are the common culprits.
Windows 10 Tip :Creating a new user account without Microsoft ID
1.Use Local Users and Groups :
In Windows Start Search field, type lusrmgr.msc to access the console.
You can easily add local users, and configure if they are part of Users or Administrators groups.
2.Go in Settings > Accounts and click on "Other people" in the left hand pane.
Click on "Add someone else to this PC".
In the next page, select "I don't have this person's sign-in information", then "Add a user without Microsoft account".