Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Depending on the source selected, MERGING+NADAC will automatically set its sampling rate accordingly.

The Sync source is always displayed on the top left corner of MERGING+NADAC display.

 

  1. WordClock input :
    If a WordClock signal is detected, MERGING+NADAC will always set its sampling rate according to it.
    If you have external devices plugged on the MERGING+NADAC, make sure those also receive this WordClock, and are configured to be synchronize on it. 
  2. AES, Optical or Coaxial input:
    When such external source is selected, MERGING+NADAC will always set its sampling rate according to it.
  3. Internal :
    Default sampling rate source when no WordClock or selected external device signals are detected.

 

MERGING+NADAC can handle 1 sampling rate at a time, you cannot set the Main output and the Headphone output to 2 different sampling rates.

  • No labels