-> Pyramix v10.1 projects are not be backwards compatible with the previous Pyramix v10.0 releases.
In order to open such projects in the previous release, please make sure that you perform the proper Save Special. A Save Special “Save as Version 10.0” was added to the list.
-> v10.x Libraries format are not compatible with older Pyramix release as v7.1.
-> Pyramix v10.0 has a warning message of “Not Enough Streams available”.
This happens when reaching the maximum record inputs available. In such case we recommend that you reduce your inputs number count or disable the Background Recorder that are consuming inputs.
If you afterwards get a constant Message Box “Re-activating Project” at each Playback start, close and re-open your project to avoid this.
Be aware that under the VS3 Control Panel if you have enable the Secondary Device you will consume Streams, disable this option is not in use.
-> Horus and Pyramix PreAmps support
GPS strips do not support the PreAmps control but VCA strips do.
Make sure that you install the latest Horus Firmware for proper communication.
-> VST Plugins not seen under Pyramix v10
- By default the “\Program Files\VstPlugins” and/or “\Program Files\Steinberg\VstPlugins” directory will be scanned if it exists, as long as the User did not specify any VST folder.
- User can select their VST plugins directory by going under the Pyramix Settings>Mixer>VST Plug-ins Settings and adding the directory where the installed VST plug-ins are.
- The initialization of third parties VST plugins takes place at the Pyramix Launch and can take a long period of time (Close to 4 minutes for a Waves plugins bundle scan). Be patient if you see that your Splash screen remains in display.
- If a crash occurs during the scanning the VST scan will be automatically relaunched, up to 3 times in a row, if a fourth crash occurs the user will be ask if he wants to relaunch the VST scan.
- The faulty plugins dll will be displayed in red and stored under C:\Program Data\Merging Technologies\VSTplugins\VSTPluginsBlacklist.crash.
- Force Rescan (From Pyramix Settings>Application>Mixer>VST Plugins) will retry to register the VST blacklisted plugins.
-> DSDConverter utility crash when rendering to DSF - more than 6 tracks
-> RAVENNA Core Audio Driver: Mic PreAmps: Horus Mapping in ProTools Gain level not accurate.
Merging has improvements in its latest firmware (v3.0.3b26178) refer to Firmware release notes
In most circumstances it is better to enable the ProTools MicPreamps option "Retain the current Setting" under the Peripherals in order not to loose MIDI Pre communication.
-> Background Recorders: Can cause a "Runtime Pure Virtual Call" error crash when removed.
Do not have the Background Recorders that you will remove selected in the Transport.
Please monitor you memory usage and it might be a good thing to reduce the Pre-Buffering and the track record count.
-> Take logger buttons do not show up in dialog
1. Go under Windows Control Panel > System > Advanced System settings.
2. Select the Advanced button Settings under Performance.
3. Enable desktop composition and enable « Animate controls and elements inside Windows ».
4. relaunch Pyramix.
-> Interchange: AAF non-embedded export to Pro Tools 7x could generate "Could not complete your request because an unexpected error happened while trying to find an audio media file’s format" error.
-> The AAF import includes a new option “Use UTF-8 conversion to import Links/Locators Path Names”.
This allows converting the referenced path names (called Locators in AAF/OMF) using UTF-8 coding.
This was the default previously and works in most cases, but we leave the option for some imports that could be problematic with or without.
-> Interchange: DAR is no longer supported since Pyramix v9.
-> Timezone time-stretch tool is no longer supported in Pyramix v10.
-> Interchange: OMF Export no longer supported, since V7.1 (Last supported in Pyramix v7.0SP3).
See with you dealer for the further information and AAF proposal plan.
-> Interchange: ProTools is compatible with ProTools version 5 and below, not with more recent versions.
-> VT Removal known issues
- TC Display reader: Not available for the moment.
- DS Video Player & QuickTime Player: Replaced by VCube essential.
-> Final Check Metering is available with Merging optional Key.
Supported in MassCore or Native mode. Not supported in Mykerinos mode.
-> Final Check Metering: When running MassCore on more than one core, it is possible (though not always the case) that Final Check cannot monitor certain bus/stem (No metering, but it works again when selecting another bus).
Do not use Final Check with more than one core.
Add an effect (any effect will do, but you may prefer to pick one that doesn’t modify the sound: phase oscillo, surround monitor…) on the bus that Final Check doesn’t want to monitor.
-> Advanced Audio Codec Support Key (optional) for MP3 and AAC support.
Necessary in order to use Merging’s handlers.
-> VoiCode Plug-in is the first professional mono to Stereo upmix. Available with optional key only as a VST plug-in.
In order for the VoiCode to be seen within Pyramix, the users will need first launch VST scanner and scan this folder path ”C:\Program Files\Steinberg\VSTPlugins\Merging Technologies”.
A VoiCode standalone installer is available for Non-Pyramix Digital Audio Workstations that support VST hosting.
Please contact support@merging.com in order to have access to it and to be informed of the known compatibility issues with certain DAWs.
-> SurCode Dolby E Decoder and Encoder VST.
Minimum required VST Buffer size is 2048 samples.
-> Timeline and Realtime Sampling Rate Conversion: clicks or noise may occur when doing playback or mixdown in a region where 2 overlapping clips reference the same media with different sampling rate than project.
->Cannot navigate from a Media Marker to the other.
To navigate from a marker to the other can be achieved by selecting the media and using the Tab keyboard key.
Make sure that under your keyboard editor under “Cursor and Marks” you must have TAB in the Nudge Cursor to Next edit command.
You can also map TAB +Shift for the Cursor Previous Edit navigation.
-> You have multiple stalls and Pyramix aborts the SACD Edited Master processing.
Merging does not recommend that Edited Master are generated Realtime, but rather in Non-Realtime. Especially when using delta's such as Trellis.
-> Cannot load DSD / DST files into the SACD disc builder interface, with error "Files.dll not registered (Philips DSD)".
Manually register the Files.dll found under C:\Program Files (x86)\PhilipsSACD :
1. Perform ALT +R to open Windows run command.
2. in the Run command type regsvr32 "C:\Program Files (x86)\PhilipsSACD\Files.dll" (for 32 bit OS use this line regsvr32 "C:\Program Files\PhilipsSACD\Files.dll").
3. Enter and confirm registration, then relaunch application.
-> MT5625: Generate CD image will not stop past last Marker if project is in Safe Record mode.
-> Noise generated when playing DSD64, DSD128 or DSD256 medias into a DXD project.
Playback of DSD media files in a DXD project requires that you Enable the Hepta SRC under your Pyramix Settings.
-> Mykerinos mode only: crash if VCA is the first strip in the mixer.
crash in VS3ui.dll if the first strip of the mixer is a VCA group.
-> Media Manager: Sampling Rate conversion can create duplicated medias in Media Manager.
-> Library and Media Manager: Copy / Paste not possible if Tab is undocked.
-> Media Manager: Columns can show up empty and stay empty.
-> Convert: might create gaps at some edit points due to conversion applied.
-> StripTools: not always opened from "Fx" track Header.
-> Settings: Read only file should be open and be put in the Location database path (and not by default be placed under documents & Settings>user name).
1. Launch regedit32.
2. Go under HKEY_CURRENT_USER\Software\Merging Technologies\Pyramix\Settings.
3. Create a new string value and name it read only backup folder.
4. Set the folder path in the read only backup folder value data field (e.g. C:\Temp).
5. Launch Pyramix (read only file will be unzipped in the set folder).
-> MT5549: Monitor Talkback section - AudioBridge mismatch.
-> Secondary Audio monitoring glitches (devices revert to a 44.1kHz sampling rate).
In some cases trying to have less Modules connected under Easy Connect.
In some cases trying to reduce your screen display resolution.
-> Mixer: Surround Panner values changes when going from Strip to Strips.
-> Relink problems when referencing to .mxf media when above 2000 media files.
In Media Manager mount Folder containing the MXF files and do a Quick Export to PMF.
Working with PMF files do not show such limitation.
-> Monitor Panel: If Max Volume is set to 0 dB you will not be able to adjust it from Monitor page.
-> Trimmer: No cursor and playback location possible with some library snapshot.
-> Project Convert DXD to MTFF or FLAC (to 2FS) end with wrong result.