Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

Depending on the source selected, MERGING+NADAC will automatically set its sampling rate accordingly.

The Sync source is always displayed on the top left corner of MERGING+NADAC display.

 

  1. WordClock input :
    The wordclock input synchronization is only used in RAVENNA, provided the base sampling rate of the stream is the same than the base sampling rate of the wordclock input.


    If you have external devices plugged on the MERGING+NADAC, make sure those also receive this WordClock, and are configured to be synchronize on it. 
  2. AES, Optical or Coaxial input:
    When such external source is selected, MERGING+NADAC will always set its sampling rate according to it.
  3. Internal :
    Default sampling rate source when no WordClock or selected external device signals are detected.

 

MERGING+NADAC can handle 1 sampling rate at a time, you cannot set the Main output and the Headphone output to 2 different sampling rates.

  • No labels