As a plugin in Pyramix / Ovation Mixer

• Install Pure Analyzer from the Flux Center (do not install Flux Bonjour option if you plan on using this on a Pyramix system)
  By default Flux Sound Grabber VST will be installed as well
• Launch Pyramix and scan the plugin, as any VST plugin.
• MassCore system : in Pyramix settings > Hardware > MassCore > VST Plugins engine, select your VST buffer size (example 1024)
  Native system : VST Buffer is the same site as your ASIO device buffer.
• Put the Sound Grabber VST on the Bus output you want to use and set a password (pull the line)
• Launch the FluxTAnalyzer-f64-x64.exe standalone application (can be found here C:\Program Files\Flux\FluxTAnalyzer.app\Contents\x64)
• On the Flux Analyzer select the Source. The source should get detected by the Pure Analyzer (name written on the Sound Grabber VST)
• Go to the Pure Analyzer Settings and put the same Password
• Go to the Pure Analyzer IO settings if you want to configure multichannels.

The drawback could be that this workflow could be very demanding on resources in high FS, like DXD.

With Merging Audio Device driver

• Install Pure Analyzer from the Flux Center (do not install Flux Bonjour option if you plan on using this on a Pyramix system)
• In the Merging Audio Device panel, please set the required number of Bridge Channels
• In Pyramix / Ovation Native (or any other compatible DAW) output the signal in the MAD Bridge channels.
• In Flux Pure Analyzer, go in the IO Settings, and select merging Audio Device as ASIO driver.
  Set the MAD Bridge channels as Inputs