Set the device base frequency to 44.1 or 48 kHz.
Set the base frequency Multiplier (X2 - X4 - X8 - ... to reach 44.1, 88.2, 176.4, 352.8, 705.6, 1'411.2 or 48, 96, 192, 384, 768, 1'536)
For future use
Arrow button / Enter, to apply any changes made on the other buttons
Sampling rates: 44.1kHz, 48kHz, X2, X4, X16, X32
ULN: Ultra Low Noise status. MERGING+CLOCK-U (ULN) edition only. Off means CLOCK-L, yellow lit means CLOCK-U.
N/10: 10 MHz signal generation status.
RVN: RAVENNA PTP clock generation status (not yet supported).
You can adjust the brightness of the MERGING+CLOCK front panel (triangle, buttons and screen) by pressing the bottom right corner of the triangle logo.
There are 16 cycling steps of brightness level.
There will be a 5 seconds timeout before having a new setting active when changed from the Clock front panel.