Third Party VST Plugins support

Certified as of Pyramix v11.1

This list is subject to frequent updates.


VST and VST3 plugins supported in Pyramix v11.1 and higher (applies as well to Ovation v7.1 and higher)
 Plugin Manufacturer/Brand

VST
(=VST2)

VST3SupportedDXD (352.8kHz) SupportAtmos SupportComments
112dB (Redline Monitor)YESNOYESYES
Crossfeed Plugin for Headphone mixing. Confirmed no upsampling/downsampling in DXD
Acon DigitalYESNOYESYES7.1.6Restauration, reverbs and chorus. Confirmed no upsampling/downsampling in DXD
Verberate Immersive 2 supports Atmos 7.1.6 layouts
Acustica Audio / AcquaYESNOYESNO
DXD not certified by manufacturer and potentially Vector Loading Acceleration issue above 192kHz
Analog ObsessionYESYESYES-ButNO
Bypass / On-Off button in the plugin UI does not respect VST recommendations, and therefore the bypass status from the mixer may not be the same as the plugin UI.  Same issue will happen with other DAWs
ArturiaYESYESYESNO
Some plugins might work in DXD but flagship ones such as the Analog Lab willl not
Auburn SoundYESNOYESYES*
Freeware: Corrector Graillon
Audio DamageYESYESYESYES*
Freeware: Fuzzplus, Rought Rider
Audio EaseYESNOYES-ButYES
Issue with Altiverb and the VST3 360 pan suite (not supported),changing presets can cause glitches
Display issues occuring relative to the display's resolution or scaling parameters
AutoTune 9NOYESYES-ButNO
Latest version only support VST3, recommended up to 2FS
B<>COMYESYESYESNO 
VST (VST2) causing Pyramix crash was fixed in the latest b<>com version. Remote desktop not supported. DXD support in next Pyramix version
Celemony MelodyneYES-ButYESYES-ButNO 

Latest certified. Can be used in the FX Rendering in order to commit the melodyne changes to a track. Workflow certified with Melodyne v4.9.5

CytomicYESNOYESYES
The Glue mastering plugin
DMG AudioYESYESYESYES*

EventideYESYESYESYES-but*7.1.4Eventide Blackhole and Micropitch Immersive: Support up to 7.1.4 layouts 
Exponential Audio
(iZotope)
YESYESYESYES5.1.4
7.1.4
9.1.6
Potential Channel mapping issue in FX Rendering
FabFilterYESYES-ButYESYES

Q3 up to 7.1.2

R2 up to 9.1.6

VST 3 Version can crash Pyramix randomly, rather use their VST (VST2) version. As well Potential Issue at the first plugin insert (licensing/disabled) second insert works. Under investigation
Multichannel issue, Merging in contact with Fabfiler on this (PMX125-66)
Facebook 360NOYESNO NO 


Potential Crash of Pyramix
Fine Cut Bodies YESYESYESYES
Freeware La Petite Excite (Exciter)
Flux VSTYESYESYESYES

5.1.4
7.1.4
9.1.4
9.1.6

IRCAM can consume a good load of resources when running at High Sampling Rates (e.g. 4FS, 352.8kHz/DXD), especially High Density mode.
Alchemist Delay compensation issue under investigation
VST version supports  up to 16 channels for Atmos
VS3 versions supports 16 channels for Atmos (excep for the IRCAM reverbs)
Forward AudioYESYESYES-ButTBC
Warning: Plugin such as the faSampleDelay can conflict with MassCore and are not recommended
GRM PluginsYESNOYES-ButTBC
GRM Spaces causing crash, GRM Space Grain has routing issue (no signal treatment)
Harpex-XYESNONOTBC
Latest version recommended for bypass and channel routing fixed issues
 IK MultimediaYES

TBC
Investigating T-RackS potential crash.
inagrmYES
YESTBC

Interlligent Sound and MusicYESYESNOTBC
Aroma plugin supported but causing potential Mixer UI flickering each time the Plugin UI is closed
Izotope BundleYESYESYESYES/No
Not all plugins support DXD, Also VST3 instabilities and potential crashes with Pyramix v11.1.5 HotFix. Solved in the Following release. In the meantime we recommend the use of the VST (VST2) version.
Izotope Ozone YESYESYESYES
(confirmed DXD support). Warning leaving the Ozone v8 UI open could cause project to crash at mixdown, when re-opening a proejct (if saved open) or when loading a Mixer Memory preset..
Izotope Nectar YESYESYESYES
(confirmed DXD support)
Izotope Neutron YESYESYESYES
(confirmed DXD support)
Izotope NeutrinoYESYESYESNO
Muted in DXD
Izotope RXYESYESYES-ButTBC
Issue with VST (VST2) channel routing (only mono available). Under investigation. RX7 Connect known to crash when using simultaneously the Pyramix Render>Pencil tool or the Import functions. Issue PMX120- 
KlanghelmYESYESYESYES
Some Freeware (VGI-Saturation/DIstortion & DC1A-Compressor. Confirmed no upsampling/downsampling in DXD
KrotosYESNOYES-ButTBC
Plugins not working in FX Rendering (muted)
Leapwing AudioYESYESYES-ButTBC  
RootOne reverb can make Pyramix crash randomly at Mixer Rebuilt.
LePou pluginsYESNOYESYES*
Guitar amps modelisation
Lexicon / HarmanYESNOYESYES*
v1.3.7
Line 6YESYESYES-butTBC
Some users had issue with the Pod Farm VST scanning (unders investigation), Helix known to be working fine.
Liquid SonicsYESYESYESTBCReverb 7.1.6 Cinematic Rooms reverb with 7.1.6 Atmos Support
Seventh Heaven Pro with 7.1.6  Atmos Support (recommended upcoming version 1.4.4, with the Presets > Synchronous Render Update to On Engine/Channel change, to fix muted reverb at the beginning of non real-time mixdown)
maat digitalYESYESYES-butNO
Code meter wibu dongle conflicts with MassCore and is not recommended. Potentially the new version may fix this conflict.
mh acousticYESYESYESNO
No GUI (Merging provides generic controls)
Massenburg design worksNOYESYESYES
MDWEQ6: No Downsampling,  fully transparent. A go to EQ from 1Fs all the way up to 8Fs (DXD 352.8kHz - 384kHz)
Mastering the MixYESYESYESNO
Issue of Blaklisted, contact Support to have a VST scanner patch .exe that solves the issue.
MDA pluginsNOYESYESYES*
No GUI
New audio technologyYESYES
TBC7.1.2 in the works for SADSpatial Audio plugin suite: 
Newfangled AudioYESYESYESYES-but*
Newfangled Audio - Potential crash with plugin re-ordering in Mixer. Confirmed no upsampling/downsampling in DXD
Noise MakersYESNOYESNO
Ambisonic suite.
Nugen AudioYESYESNOYES*7.1.4 Use version 3.0> to prevent a fixed crash. Confirmed no upsampling/downsampling in DXD, Routing issue with the UpMix is fxed in their latest versions
Nugen Audio Halo Upmix: Multichannel support
Oblivion Sound LabYESNONONO
Potential Crash (Chorus)
PensadiaYESNOYESNO

Perfect Surround (Penteo)YES/NOYESYESNO5.1.4
7.1.4
9.1.6

Not all of them are VST & VST3. the Pandeo VST3 supports up to 16 channels

Merging is in close contact to officially support Pyramix as a DAW by the Manufacturer.

Plugin AllianceYESYESYES-but*NO
Latest v4.7 is now supported by Pyramix (perform a force rescan) but some Plugins from their 3rd party partners are still not supported and can crash or not be scanned (Schoeps, Fiedler, ADPTR and Unfiltered series). As well some of their 3rd party plugins will only show up mono routing Support. The Plugin Alliance team is following this issue with their own partners.
PSP AudiowareYESYESYESYES-but*9.1.6Potential issue with PSP Vintage Warmer not always opening correctly or crashing randomly.
PSP auralComp supports up to 16 channels
RelabYESYESYESTBC
LX480
Sennheiser AMBEOYESYESYESYES*
For Ambisonic
Slate Plugins YESYESYESYES*
Some plugins like the VBC rack plugin can cause hang of Pyramix at first insert.
The Slate  Trigger 2 will crash in DXD 
Most of their plugins will work in DXD, including the new Fresh Air.
Slate VSX - VST software Supported.
SoftubeYESYES-but*YESNO

Softube plug-ins supported sample rates: 44.1, 48, 88.2, 96, 176.4 and 192 kHz. As for DXD & 384 kHz they wre officially not supported by manufacturer and could potentially crash.
*Some plugins such as TubeTech Classic Channel, Valley People Dynamite, Transient Shaper, Weiss plugins will not pass any audio in Pyramix when they are engaged. Workaround use the VST versions.

Sonible pluginsYESYESYESYES*

Sonic AnomalyYESNOYESYES-but*
Plugins can generate clicks in DXD parameters automation.
SonnoxYESYESYES-butNO
Crash with ebuzzer - Declicker - Denoiser (v2.01)  and Sonnox Dynamics can crash in DXD insert - Being investigated by the Sonnox team
SonorisYESNOYESTBC
Recommended latest version (1.0.4.0 >) to avoid crash in settings chages
SoundfieldYESNOTBCTBC
Surround and Ambisonc plugins
SoundRadixNOYESYESTBC
AutoAlign v2 supported.
SoundtoysYES NOYESTBC

SSA pluginsYESNOYESTBC
Ambisonic suite.
Stone VoicesYESNOYESYES*
Freeware: Ambient Reverb
SSL pluginsYESNOYESTBC

Syncro ArtsNOYESYES-butNO
Potential crash at Pyramix insert
TAL (Togu Audio Line)YESNOYESYES*

TC ElectronicsYESYESYESNO
VSS3 Reverb, automation on presets not showing the preset changes (TC Electronics issue, it was reported to them)
The Cargo ClubYESYESYESTBCUp to 7.1.2Spanner - Splatter - Stemcell
Tokyo Dawn LabsYESNOYESYES*
TDR Kotelnikov dynamics compressor and EQ (free)
ToneBoosterYESYESYESYES5.1.4
7.1.4
9.1.4

Barricade 4 certifed for Pyramix and supporting up to 16 Channels. Confirmed no upsampling/downsampling in DXD  
Compressor4: Supports up to 16 channels
MBC: Multi-Band Compressor and saturator: Supports up to 16 channels

Tritik YESYESYESYES
Quality plugin suite, intersting for DXD users. Confirmed no upsampling/downsampling in DXD
TSE Audio - TSE-808 YESNONONO
Potential crash with parameter changes
UAD1YESNONONO
No longer supported discontinued
UAD2YESNOYESNO
Supported for real Time Mixdown and playback, but not faster than real-time (UAD not supporting latency changes in non real time mixdown)
u-heYESNOYESYES
Freeeware: Protoverb 
VoxengoYESYESYESYES-but*
Warning: Reverb in DXD could be stuttering
ValhallaYESYESYESYES-but*
Confirmed no upsampling/downsampling in DXD but the delay buffers might not allocate enough memory at times causing glitches
WavesYESYESYES-butNO9.1.6 with some plugins suitesVST3 - Wave 10 slow loading, fixed in Pyramix v11.1.6 HotFix and v12.0, and 25th Anniversary version.
Waves v12 supported in Pyramix.
Recommended Nvidia graphics parameters (see Merging’s knowledge database). Some Waves crash in DXD
Most of the Waves plugins are limited to 96khz some will go to 192kHz, refer to their specifications.

 Spherix Compressor and Spherix Limiter up to 9.1.6
XLN AudioYESNOYESYES*
Addictive Trigger works nicely in DXD, but is very resource demanding.
Youlean YES YES YES YES*

 Loundess Meter

* While working in DXD, the manufacturer does not clearly state DXD (352.8kHz) support.
Many plugins do not force a Max sampling rate, but some could upsample/downsample so adding a sampling rate conversion process in DXD.
A small risk remains to have potentially wrong peak vs. average load readings as well

TBC= To be Confirmed

Note: 32 bit plugins are not supported by Pyramix/Ovation as of v10 and VST3 plugins are only supported as of Pyramix v11.1