Mixer Error

Owned by Ricardo
Last updated: Aug 05, 2016 by Guillaume Defer (Unlicensed)

Warning for mixers created in RC1 or before

  • you may have an issue where if the strip connection to the bus was changed from Channel Router to Pan or vice versa, that you will may have strange settings in the Bus Trim
    • In Pan mode you will see the icon below PAN lit up Yellow
  • This happened because the mode was changed between one and the other modes while the connection was OFF. 
  • So, if you notice that signal is not getting to parts of your bus, please check the bus trim and make sure you are feeding all channels of the bus correctly.