Connecting an external audio device to MERGING+NADAC

Owned by David Jacques
Last updated: Oct 29, 2015
1 min read

You may connect external audio devices to MERGING+NADAC.

When an external source is selected, MERGING+NADAC automatically adapts its sampling rate to the incoming signal.

MERGING+NADAC can handle 1 sampling rate at a time, you cannot set the Main output and the Headphone output to 2 different sampling rates.

Step-by-step guide

 

  1. Connect your external device to MERGING+NADAC AES, Optical or Coaxial connector.
  2. Start the external device
  3. Long press the MERGING+NADAC rotary button to access the menu.
  4. Select Sources and short press the MERGING+NADAC rotary button
  5. Select the Main source and short press the MERGING+NADAC rotary button
  6. Select the required external input; AES, Optical or Coaxial  and short press the MERGING+NADAC rotary button.

    MERGING+NADAC will now switch its sampling rate to the incoming signal if required.