HOW TO USE THE SAME OUTPUTS ON DIFFERENT SPEAKERSET WHEN USING ADDITIONAL IO FROM HORUS/HAPI AND SO, BY USING THE PEERING.

Owned by Didier Bender (Unlicensed)
Nov 22, 2022

 

In fact, it is not possible to share the same outputs on different speaker set by using ANEMAN.

This will report the following error. “Connect to an OK receiver” because it is usually not allowed to sum sources to many receiver.

 

The correct way to process is then to peer the used module from ANUBIS

From Anubis > Open the Peering Menu:

 

Select a Merging device (Horus / Hapi) from the list then select an output module.

The selected module will then “be a part of the ANUBIS IO”

From Settings>Monitoring>Monitors> Selected SpeakerSet

You will then be able to patch the speaker set at your convenience and use the same outputs on different SpeakerSet. (To patch all channels from the module at once, use the Auto function)

From The ANEMAN side, the connection will then appear in Black as any other “internal” connection.

E.g. Result from the animated screenshot below: with a 2.2 Speaker Set & a 7.4.1 sharing a DA + Additional out on ADA for the 7.4.1 speakerset