Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

You can use the RS422 port of the MTCHIO without any Mykerinos connected.
Note that the other connectors, Video Ref, Wordclocka and LTC can only work with a Mykerinos.

Step-by-step guide

To be able to use MTCHIO 9 pin module without Mykerinos, you must remove the jumper from JP3 ( 5V from the Mykerinos board through the 16pins ribbon cable connected to the Video/TC header ) and put it on JP2 (5V from the PC power supply through a Molex connector)

See the detailed picture below to locate exactly these I/Os:

 

WARNING: Never connect both JP2 and JP3 at the same time.

 

 

To be able to use MTCHIO 9 pin module without Mykerinos, you must remove the jumper 

  • No labels