Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »





Merging Technologies ZMAN-based devices, Anubis, Hapi MKII, ZOEM, MT48.
Previous devices, Horus and Hapi cannot run in Dante Mode.


How to access the Advanced pages

  1. With the device IP address (Anubis / Hapi MKII / MT48)
    In your browser, enter the device IP address followed by /advanced/index.html
    E.g: 169.254.80.179/advanced/index.html
  2. Through MT Discovery :
    Right click on your Merging Dante ZMAN device and select Open Advanced.


GENERAL SETTINGS

Device Name

  • This is the unique zeroconf device name.  Other devices see this device name.
    Reboot is not required for the change to apply.  Equivalent to device Setup menu > Network > Device Name (Hapi)
  • Location : information text (64 characters max)

Audio Configuration 

  • Sample Rate : current sample rate (44100-48000- 88200-96000-176400-192000)
  • Frame size (@1Fs) :current frame size (12 - 24 - 48 - 96 - 240).

Network

  • Redundant mode : Activate / deactivate Redundant mode - only applicable to Merging devices supporting such feature.
    A reboot is required for the change to apply.

Interface 1-2

Note : depending on the device and firmware, only Interface 1 might be available.

  • Link : status
  • Name : information only - can't be modified
  • Type : defines the type of IP V4 address used (Zeroconf - DHCP - Static)
  • Address - NetMask - Gateway - DNS : only available if Type is set to Static.
    Reboot is required for changes to apply.


INS/OUTS

Allows to change the name of module's specific Inputs and / or Outputs. (when applicable)




I/O ROUTER

Allows to connect physical I/O and Internal device router.


DANTE

Licensing



SYSTEM

Build Number

Current firmware version

Configuration file 

  • Download / Upload : Save / Load device configuration (preset file).

Commands

  • Shutdown : shutdown the device
  • Reboot : restart the device
  • Reboot to Factory : restore all settings to factory default, and restart the device
  • Restart : Restart the application (Mission)
  • Save : save the current configuration.

Debug

  • Get Report : generates a debug report, and saves it on the local computer. 
    If the report is not saved automatically, make sure your web browser did not block the download.
  • Get Device Status : displays the device status (SysLog)
  • Get Device Engine Status : displays the device engine - ZMAN-based devices only


UNIT IDENTIFIER

Identify me : Provides visual feedback on the unit to allow the user to quickly identify a unit (currently only available for ZMAN-based products; Anubis, Hapi MKII).
When ticking the checkbox :

      • Anubis and MT48 displays their Device Name on TFT and flashes Home button.
      • HapiMkII flashes its front panel Merging logo.


Appendix



https://en.wikipedia.org/wiki/Session_Description_Protocol
https://standards.ieee.org/standard/1588-2008.html
https://en.wikipedia.org/wiki/Precision_Time_Protocol








  • No labels