Status 18.7.2023
Lawo Home is now fully supported with our latest firmware that you’ll find under https://www.merging.com/support/downloads
As a short reminder it adds on top of the AES67/ST2110/RAVENNA network the ability to:
Discover devices and registering them
System Security
Device Management
Agility
Operability
Scalability
...
Compatibility
To enable Lawo Home support with Merging products, it is crucial to download the firmware under https://www.merging.com/support/downloads
Anubis (all versions) - Firmware 1.5.1.55809 (or above)
Hapi MkII - Firmware 1.5.1.55774 (or above)
Hapi (1st generation) - Firmware 3.12.0.55774 (or above)
Horus - Firmware 3.12.0.55774 (or above)
MAD (Merging Audio Device - AES67/RAVENNA/ST2110 driver for Win10/11) - V2.2.4 (or above)
Following functionalities from Lawo Home are supported
Discovery
Connectivity
Mic Preamp control (Merging ADx modules and Anubis)
Activation of Lawo Home within the advanced pages of our webapp
HOME TAB
Home Server: NATS server address (alternatively, the Home Server IP address and port can also be entered).
Note : Home must be disabled to access the settings.Enable: enable or disable the Home client, following the Home Server address.
Server address found: Server address found according to the Home Server field.
Registered: Current connection status
...
Those following products are for the time being not supported
MassCore (Ovation and Pyramix)
VAD (Virtual Audio Device driver for macOS)
In the future some of the devices in the list above may be supported, but it is without guarantee for now.
Pricing
Compatibility with Lawo Home is inclusive with the firmware of Merging’s hardware devices. There will be no extra charge.
For Lawo pricing, please get in touch with your Lawo dealer or SI.
Concerning MAD an option is required to unlock the Lawo Home compatibility, please refer to your local Merging dealer/distributor for the price.
...
Merging’s 1st compatible Lawo Home release : 18.7.2023
In case you wish to report some issues on the merging products concerning the compatibility, please contact support@merging.com
For support or all general Lawo Home questions, please contact directly Lawo, we do not handle Lawo Home support.
In case you need some more detailed information about merging’s integration that cannot be found on this page and on its links please contact maurice.engler@merging.com
Known Issues:
Windows is not responding in time to IGMP queries so the switch removes Masscore from the Multicast Group.
Due to Windows reaction time, you might have to extend your switch IGMP timings.All information can now be found in Lawo HOME integration