Page Comparison

...

1. With the device IP address (Anubis / Hapi MKII / MT48)
   In your browser, enter the device IP address followed by /advanced/index.html
   E.g: 169.254.80.179/advanced/index.html
2. Through MT Discovery :
   Right click on your Merging Dante ZMAN device and select Open Advanced.
   

GENERAL SETTINGS

Image Removed REDO SCREENSHOT WITH REDUNDANT MODE TEXTImage Added 

Device Name

• This is the unique zeroconf device name.  Other devices see this device name.
  Reboot is not required for the change to apply.  Equivalent to device Setup menu > Network > Device Name (Hapi)
• Location : information text (64 characters max)

...

Note : depending on the device and firmware, only Interface 1 might be available.

...

• • • Anubis and MT48 displays their Device Name on TFT and flashes Home button.
    • HapiMkII flashes its front panel Merging logo.

Appendix

External Links

https://enwww.wikipediaaudinate.orgcom/wiki/Session_Description_Protocol
https://standards.ieee.org/standard/1588-2008.htmllearning/technical-documentation
https://en.wikipedia.org/wiki/Precision_Time_Protocol

...