Page Comparison

Image RemovedImage Added

...

1. Make sure your Anubis is detected in MT Discovery
2. Download and install RTPMidi http://www.tobias-erichsen.de/software.html
3. Start RTP MIDI
4. Under My Sessions section, click on the + sign to create a new session, and name it.
5. Once the Session has been created, select the Anubis_<Serial>_midi_din in the available streams and click on Connect.
6. The midi_din stream will be passed in the Participants section, make sure that this one is enabled above. You can now use it in your preferred DAW/MIDI application.
   Image RemovedImage Added

Procedure for MacOS users

1. Connect your MIDI controller (such as a keyboard) to your Anubis MIDI I/O connector.
   If you're using a MIDI interface, connect the Anubis RAVENNA cable to your Mac ethernet interface.
2. Launch your DAW/MIDI application for MIDI use.
3. The Anubis MIDI port should be available for configuration.
   
   Reaper on Mac example :
   Image RemovedImage Added
   
   ProTools on Mac example :
   Image RemovedImage Added
   

You can now integrate Anubis in your MIDI devices setup.

...