Page Comparison

...

1. Start the Merging Audio Device panel.
2. Select the MASSCORE mode tab and confirm you want to switch the mode.
   
   Note : The panel will indicate that the Bridge is not initialized and MassCore not running, that is normal.
   
   
3. Click on the Advanced Settings button at the bottom of the UI.
   
   
   
4. Now the number of channels needs to be set.
   Click on the value next to Inputs or Outputs (in this mode, the number of channels for inputs and outputs is the same.)
   Select the Change... value
   Image Added
   
   
5. This will automatically open the VS3 Control Panel.
   Please make sure that Pyramix or Ovation Platform is set to MassCore.
   
   
6. In the Audio Bridge section at the bottom of the panel, activate the MT ASIO bridge Host.
   Set the required Number of Channels (I/O)
   Press OK to confirm and close the panel.
   Image Added
   
   Note : the number of channels values will be updated automatically in the MAD panel.
   
   
7. Start your MassCore Pyramix / Ovation.
   The MT ASIO bridge inputs 
8. ASIO DAW

Start MAD and clickon MSC

Confirm

Open the advanced settings

set number of channels

VS3 activate MT ASIO Bridge and set channels
OKto confirm and close VS3CP

Num of channels will update automatically 

...

BRIDGE CHANNELS MSC