In Ovation NativeVCube, you can also use the LTC in and out coming from your Horus or Hapi deviceNetworked MTC (RTPMidi) to synchronize.
Info | ||
---|---|---|
| ||
Ovation 5VCube 6.1.x or above required |
...
- Download and install RTP MIDI, that will allow to create Networked MIDI ports.
http://www.tobias-erichsen.de/wp-content/uploads/20152016/0811/rtpMIDISetup_1_1_6_238.zip - Start RTP Midi
- Create a new session, by clicking on the + icon under My Sessions section and enter a name (RAVENNA LTC MTCNETWORK in our example).
- In the Directory section, select both yourdevicename_LTC_In and LTC_ Out and click on Connect to add it in the Particpants section.
- Start OvationVCube
- Go in Ovation VCube settings > Player Units > MIDI and select the MIDI port created in RTP MIDI (RAVENNA LTC in our example).
Enable MIDI and set the Virtual MIDI port to MIDI1.
- Go in Ovation settings > Controller Units > MIDI and select the MIDI port created in RTP MIDI (RAVENNA LTC in our example).
Enable MIDI and set the Virtual MIDI port to MIDI1.
Enable MIDI TimeCode (MTC).
...
- Format & Sync > Synchronization section and click on the Settings button next to Midi Time Code Input.
You can select the virtual MIDI port you have created in RTP MIDI. - Enable the Midi Time Code input by clicking on its radio button.
- Select Midi Time Code(MTC) in the Chase TC source drop down menu.
You can now activate VCube Chase to chase the incoming MTC.
Note |
---|
It is highly recommended to use a common video ref between Horus/Hapi and the other devices that will use the TimeCode. |