Page Comparison

1. Download from https://www.wireshark.org/download.html
2. Install Wireshark.
   Use the default installation options (USBPCap and additional installation options are not required)
3. Reboot your computer and start your RAVENNA/AES67 Applications
4. Start Wireshark

5. Locate your RAVENNA/AES67 network interface.

6. Double click on the interface or click on the Capture button.
   Image Added
7. Let the capture run 90 seconds.
   Important note : if your issue is intermittent, make sure your capture is made while your issue is happening.
   
   
8. Click on the Stop Capture button 
   Image Added
9. Go in the File > Save menu
   Please click on the "Compress with gzip" option to reduce the size of the file.
   Image Added
10. Please send the .gz file
    Due to the size of the file, you will need to send it with Wetransfer, DropBox, GoogleDrive,... (not with regular emails).

Tip : The interface names are the ones used in Windows. 
You can simply rename your interface in Windows Network and Sharing center.  
Please restart the Wireshark application, your interface will be available with its new name.
Image Modified

Tip : If you don't see your interface in Wireshark's list, go in Windows Network and Sharing center and right click on the required interface to access its Properties.
Make sure the Npcap Packet Driver (NPCAP) is ticked and click on OK to confirm the change.
Please restart the Wireshark application, your interface should be available now.
Image Modified

...