Page Comparison

...

• Pyramix - Merging Audio Device
  Please open the MAD Panel, and click on Advanced settings :
  Set MAD in RAV/AES67 mode
  Set Merging Audio Device as Master ASIO Host
  Set the sampling rate to 48000
  Set the Buffer size to 512
  Set the Sample type to 32bit integer
  Set the required Number of Inputs and outputs:
  Up to 128 Inputs and outputs, but unused channels will still use some power processing. 
  Therefore Merging recommends you rather set the number of channels you need ; e.g. if you don't plan to use Live Re-renders, 8 inputs are sufficient.
  Merging recommends you disable the MAD - WDM, or do not set the WDM outputs to any Bridge channels, to avoid having the WDM channels routed into the Dolby Atmos Renderer.
  Set the Latency to 6/12/48 AES67 (mandatory for DANTE devices) or 16/32/64 (RAVENNA).
  Click on Apply
  Image Added
  
• Hapi MKII
  Browse to Setup > System, and set the Latency to AES67 48smp (mandatory for DANTE devices) or Low 64 smp (RAVENNA).
• Anubis
  Browse to Home (Merging logo button) > Settings > General, and set the Latency to AES67-48 (mandatory for DANTE devices) or Low-64 (RAVENNA).
  
• DANTE devices
  Your DANTE devices must be set to AES67 mode.  Please consult your DANTE device documentation for details.

...

• • Switch to RAV/AES67 mode
  • Set the Latency to 10 ms (480)AES67 (mandatory for DANTE devices) or ??????????????????? TEST 256 SAMPLES
  • Tick the Safe Mode option.
  • Set the sampling rate to 48000
  • Set the required Number of Inputs and outputs:
    Up to 128 Inputs and outputs, but unused channels will still use some power processing. 
    Therefore Merging recommends you rather set the number of channels you need ; e.g. if you don't plan to use Live Re-renders, 16 (up to 9.1.4 + Binaural) or 24 outputs are sufficient.
    SCREENSHOT BOTH AES67 AND RAV SETTING
    Image Added
    

Windows - Merging Audio Device driver

...

• • Set MAD in RAV/AES67 mode
  • Set the Latency to 16/32/64
  • Set Merging Audio Device as Master ASIO Host
  • Set the sampling rate to 48000
  • Set the Buffer size to 512
  • Set the Sample type to 32bit integer

  • Set the required Number of Inputs and outputs:
    Up to 128 Inputs and outputs, but unused channels will still use some power processing. 
    Therefore Merging recommends you rather set the number of channels you need ; e.g. if you don't plan to use Live Re-renders, 16 (up to 9.1.4 + Binaural) or 24 outputs are sufficient.

  • Merging recommends you disable the MAD - WDM, or do not set the WDM outputs to any Bridge channels, to avoid having the WDM channels routed into the Dolby Atmos Renderer.
  • Click on Apply
    
    Image Added
    

Configure the Dolby Atmos Renderer application.

...