Content Comparison

...

• Create a Sample Rate Zone (if you don't already have one)
  Drag and drop MassCore on Pyramix ASIO on the top of the zone (inside the crown icon).
  Drag and drop Anubis and the additional device(s) in the zone.
  Drag and drop the CoreAudio (Dolby Atmos Renderer on a Mac computer) or ASIO (Dolby Atmos Renderer on a Windows computer) in the zone.

Connecting

...

Pyramix ASIO to the Dolby Atmos Renderer

• In the World view (left pane), select both MassCore the Pyramix ASIO and CoreAudio (Mac) or ASIO (Windows).
• In the Matrix (right pane), connect the relevant MassCore Pyramix ASIO outputs to CoreAudio or ASIO inputs.
  Note : the number channels to connect should be set in accordance with the driver and the Dolby Atmos Renderer configuration.
  E.g. If you have set the LTC Input to channel 128 in the Dolby Atmos Renderer, obviously you have to connect the corresponding MassCore Pyramix ASIO output 128.
  
• If you plan to use Live Re-renders, please also connect the relevant CoreAudio or ASIO outputs on MassCore Pyramix ASIO inputs.
  The Live Re-enders channels number is set in the Dolby Atmos Renderer - Windows - Room Setup - Routing Tab.
  E.g. If Re-renders channels is set from 25 to 88 , connect the CoreAudio or ASIO outputs 25 to 88 (if you need 64 channels for Re-renders)
  
  

...