Page Comparison

You did get a RTX dongle (SSK-HUD-RTX) with your license already activated by Merging.
During the installation, if you are connected to the internet, you may get a message from RTX64, saying that it is not authorized, and that your activation key has already been used.
If you are not connected to the internet, you will get no error message. 

1. Plug the SSK-HUD-RTX dongle, Windows should automatically install its driver.
   (If not, download and install its driver from Safenet website: http://sentinelcustomer.safenet-inc.com/DownloadNotice.aspx?dID=8589947119)

2. Open the Activation and Configuration dialog. This dialog appears once RTX64 has been installed.

   You can also launch it from Start > All Programs > IntervalZero RTX64 2013 > Activation and Configuration.
3. Make sure the Activation and Configuration utility shows a dongle icon.
   If the dongle is not recognized, make sure it is securely connected to your machine.
   Proceed only once you see the Dongle Active icon.
   
4. In the Product Activation dialog, click Import License.
5. Browse for and open the file SSK-HUD-RTX_SerialNumber.lic you received with the activated dongle.
   NOTE: The license is locked to the dongle. The dongle must be connected when you start the machine in order to use RTX64 components.

6. You can now close the Activation and Configuration panel, and restart the computer, using the standard Windows 7 boot line.
   Open the RTX64 Control Panel, from Start > All Programs > IntervalZero RTX64 2013 > RTX64 Control Panel.
   You should see that RTX64 is now activated, with a dongle. (See dongle icon). 
    

7. Restart now the computer with MassCore boot line, and configure VS3 Control Panel, as described in Pyramix installation guide.