Page Comparison

...

1. With the device IP address (Anubis / Hapi MKII / MT48)
   In your browser, enter the device IP address followed by /advanced/index.html
   E.g: 169.254.80.179/advanced/index.html
   The device IP address can be found on the device Network Settings and in Dante Controller Device View > Status Tab.
2. Through MT Discovery :
   Right click on your Merging Dante ZMAN device and select Open Advanced.
   Image RemovedImage Added

Dante Controller

Sample rate and network configuration can also be accessed with Dante Controller.
Some settings (device latency, audio codec,....) can only be accessed with Dante Controller.

GENERAL SETTINGS

Device Name

• This is the unique zeroconf device name.  Other devices see this device name.
  Device Name is case insensitive, 31 characters max, Unicode and non-roman characters are not supported.
  See Dante Documentation for details.
  Reboot is not required for the change to apply.  Equivalent to device Setup menu > Network > Device Name (Hapi)
• Location : information text (64 characters max)
  
  

...