...
The flexibility of HOME UI may imply that certain operations are achievable in Merging devices. However, because HOME has a general-purpose design, certain actions are restricted due to the features or constraints of Merging devices.
Once a sender/receiver is created, it’s not possible to resize its channel count, nor specifying the frame size in samples (managed via global settings in advanced pages)
It’s not possible to patch virtual inputs with virtual outputs in Anubis or Hapi MKII
In Horus/Hapi MKI, when setting up a source, it’s not possible to disconnect the input card (every source must always have an input)
In Horus/Hapi MKI, when setting up a source/sink, all the physical channels must belong to the same I/O card and be contiguous
In Horus/Hapi MKI internal routing is not supported in HOME, please make reference to Merging’s UI
(Setup → Routing)
Windows is not responding in time to IGMP queries so the switch removes Masscore from the Multicast Group. Due to Windows reaction time, you might have to extend your switch IGMP timings.
...