...
Open MTDiscovery and locate your compatible device, right click on it, then select “Open advanced page”:
In the “HOME” tab, enter the IP:PORT of your Lawo HOME server (or server cluster), and click on “Enable”
| Info |
|---|
In case you want to specify a HOME cluster it will be enough separating each <ip>:<port> combination with “;” (e.g.: 169.254.200.100:4222;169.254.1.222:4223). |
Once Registered shows “everything ok” you’ll find your device in HOME Device tab
To disconnect your Merging device from Lawo HOME, you can uncheck the “Enable” checkbox
...
It’s not possible to patch virtual inputs with virtual outputs in Anubis or Hapi MKII
In Horus/Hapi MKI, when setting up a source, it’s not possible to disconnect the input card (every source must always have an input)
In Horus/Hapi MKI, when setting up a source/sink, all the physical channels must belong to the same I/O card and be contiguous
In Horus/Hapi MKI internal routing is not supported in HOME, please make reference to Merging’s UI
(Setup → Routing)
Windows is not responding in time to IGMP queries so the switch removes Masscore from the Multicast Group. Due to Windows reaction time, you might have to extend your switch IGMP timings.
Pricing
Compatibility with Lawo Home is inclusive with the firmware of Merging’s hardware devices. There will be no extra charge.
For Lawo pricing, please get in touch with your Lawo dealer or SI.
Concerning MAD an option is required to unlock the Lawo Home compatibility, please refer to your local Merging dealer/distributor for the price.
Support
In case you wish to report some issues on the merging products concerning the compatibility, please contact support@merging.com
For specific Lawo products inquires, please get in touch with your Lawo sales rapresentative.