Page Comparison

...

1. Plug your the Sub D15 Sync cable on your Horus/Hapi
2. Plug your LTC input and or output on this cable
3. Download and install RTP MIDI, that will allow to create Networked MIDI ports.
   httphttps://www.tobias-erichsen.de/wp-content/uploads/2015/08/rtpMIDISetup_1_1_6_238.zipsoftware/rtpmidi.html
4. Start RTP Midi 
5. Create a new session, by clicking on the + icon under My Sessions section and enter a name (RAVENNA LTC in our example).
6. In the Directory section, select both yourdevicename_LTC_In and LTC_Out and click on Connect to add it in the Particpants section.
   
    
7. Start Ovation
8. Go in Ovation settings > Player Units > MIDI and select the MIDI port created in RTP MIDI (RAVENNA LTC in our example).
   Enable MIDI and set the Virtual MIDI port to MIDI1. 
   
    
9. Go in Ovation settings > Controller Units > MIDI and select the MIDI port created in RTP MIDI (RAVENNA LTC in our example).
   Enable MIDI and set the Virtual MIDI port to MIDI1. 
   Enable MIDI TimeCode (MTC).
   

...