Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »


Your Horus/ Hapi does not sync to the incoming MADI signal :

Go in I/O & Sync page and make sure that MADI signal is detected, the presence LED must be blue.
If the MADI signal is not detected, verify that you have selected the required MADI input, Coax (BNC) or Optical, in Setup > Modules page, as well as the Framing (48 or 96k frame)



If the signal is detected but the Horus / Hapi still can't sync, select the sampling rate manually in Setup > Format, and make sure you disable the "Auto" option.

  • No labels