Navigation buttons:
Set the device base frequency to 44.1 or 48 kHz.
Set the Multiplier for the base frequency (X2 - X4 - X8 - X16 to reach 44.1, 88.2, 176.4, 352.8, 705.6 or 48, 96, 192, 384, 768)
Enter
+ - 44.1, 48, Fn
Clock indicator: Status (e.g. green WC)
Sampling rates: 44.1khz, 48kHz, X2, X4, X16, X32
ULN: Ultra Low Noise. Will only be lit one the MERGING+CLOCK-U (ULN) edition.
N/10: The Clock generates a 10 MHz signal, or 10 million cycles per second.
RVN: RAVENNA PTP clocking not yet supported
Changing CLOCK parameters.
There will be a 5 seconds timeout before having a new setting active when changed from the Clock front panel.
RR: Add a Back Panel image with details on the BNC connectors.