/
MERGING+CLOCK Indicators and Navigation
MERGING+CLOCK Indicators and Navigation
Navigation buttons
Set the device base frequency to 44.1 or 48 kHz.
Set the base frequency Multiplier (X2 - X4 - X8 - ... to reach 44.1, 88.2, 176.4, 352.8, 705.6, 1'411.2 or 48, 96, 192, 384, 768, 1'536)
For future use
Arrow button / Enter, to apply any changes made on the other buttons
Front panel
Sampling rates: 44.1kHz, 48kHz, X2, X4, X16, X32
ULN: Ultra Low Noise status. MERGING+CLOCK-U (ULN) edition only. Off means CLOCK-L, yellow lit means CLOCK-U.
N/10: 10 MHz signal generation status.
RVN: RAVENNA PTP clock generation status (not yet supported).
Display brightness
You can adjust the brightness of the MERGING+CLOCK front panel (triangle, buttons and screen) by pressing the bottom right corner of the triangle logo.
There are 16 cycling steps of brightness level.
Changing CLOCK parameters
There will be a 5 seconds timeout before having a new setting active when changed from the Clock front panel.
, multiple selections available,
Related content
MERGING+CLOCK.
MERGING+CLOCK.
Read with this
MERGING+CLOCK FAQ
MERGING+CLOCK FAQ
Read with this
Merging RAVENNA Advanced Pages User Guide.
Merging RAVENNA Advanced Pages User Guide.
More like this
Merging Audio Device.
Merging Audio Device.
More like this
Merging Audio Devices Performances Debug.
Merging Audio Devices Performances Debug.
More like this
ASIO - MAD Infrastructure pack.
ASIO - MAD Infrastructure pack.
More like this