Configure AcourateConvolver with MERGING+NADAC on Windows

Prerequisite

The MERGING+NADAC ASIO driver is installed and configured
Media Player ASIO capable
AcourateConvolver installed http://www.audiovero.de/acourateconvolver.php 

 

  1. Start AcourateConvolver
     
  2. Set Data Source to AcourateASIO
    Select Merging Ravenna ASIO as Soundcard 
     
  3. In the routing Matrix, configure the outputs (NADAC, displayed as yourcomputername_outputnumber)
    The Inputs have to be set to Virtual In.
    You have to define such routing Matrix for each sampling rate.

     
  4. Load a Filter for each routing Matrix line.
    IF YOU DON'T LOAD ANY FILTER, THERE WILL BE NO AUDIO
     
  5. Start your Media Player
     
  6. In your Media Player, set AcourateASIO as your audio device
     
  7. Launch the playback. 


    Take care of the CPU load indicator, if it goes above 80%, you may get distorted audio !