In Pyramix Native, you can also use the LTC in and out coming from your Horus or Hapi device.
Prerequisites
Pyramix 9.1.x or above required
SUB D15 Sync breakout cable (CON-D15-VTC)
- Plug your the Sub D15 Sync cable on your Horus/Hapi
- Plug your LTC input and or output on this cable
- Start Pyramix
Connect the Horus/Hapi LTC to MassCore :
- For Pyramix to chase an incoming LTC plugged on your device, open Pyramix Transport Window and click on the MASTER selection, to set it to LTC READER.
Pyramix can now chase such TC by clicking on the Chase button of the Transport window.
It is highly recommended to use a common video ref between Horus/Hapi, MassCore and the other devices that will use the TimeCode.
Otherwise, the synchronization between the devices will drift over time.